BW Professional Cutter Expert www.tool-tool.com

Bewise Inc. www.tool-tool.com Reference source from the internet.

Airbus S.A.S.
Type	Subsidiary
Founded	1970 (Airbus Industrie) 2001 (Airbus S.A.S.)
Headquarters	Toulouse, France
Key people	Thomas Enders, CEO Hans Peter Ring, CFO John Leahy, Sales Director Fabrice Brégier, COO
Industry	Aerospace
Products	Commercial airliners (list)
Revenue	€23.5 Billion (2005)
Employees	55,000-57,000[1]
Parent	EADS
Slogan	"Setting the standards"
Website	www.airbus.com

Airbus S.A.S. is the civil aircraft manufacturing subsidiary of EADS N.V., a pan-European aerospace concern. Based at Toulouse, France with significant operations in other European states, Airbus produces around half of the world's jet airliners, with most of the rest built by rival Boeing Commercial Airplanes, though the precise share varies on an annual basis. The name is pronounced air-bus in English, /ɛʁbys/ in French, and /ˈɛːɐbʊs/ in German.

Airbus began as a consortium of aerospace manufacturers. Consolidation of European defence and aerospace companies around the turn of the century allowed the establishment of a simplified joint stock company in 2001, owned by EADS (80%) and BAE Systems (20%). After a protracted sale process BAE sold its share holding to EADS on 13 October 2006.^[2]

Airbus employs around 57,000 people at sixteen sites in four European countries: Germany, France, the United Kingdom, and Spain. Final assembly production occurs at Toulouse (France) and Hamburg (Germany). Airbus also has three subsidiaries, in the United States, Japan and China.

[edit] History

Airbus Industrie began as a consortium of European aviation firms to compete with American companies such as Boeing, McDonnell Douglas, and Lockheed.

Until the late 1960s, European aircraft manufacturers competed with each other as much as with American companies. While many European aircraft were innovative, even the most successful had small production runs.^[3] In 1991, Jean Pierson then CEO and Managing Director of Airbus Industrie, described a number of factors which explained the dominant position of American aircraft manufacturers; The land mass of the United States made air transport the increasingly dominant mode of travel; a 1942 Anglo-American agreement entrusted transport aircraft production to the US; and World War II had left America with "a profitable, vigorous, powerful and structured aeronautical industry."^[3]

In the mid-1960s, tentative negotiations commenced regarding a European collaborative approach. At the 1965 Paris Air Show major European airlines informally discussed their requirements for a new short- to medium-range "airbus". European aircraft manufacturers were aware of the risks of such a development and began to accept, along with their governments, that collaboration was required to offer such an aircraft and to compete with the US manufacturers.^[4] The same year Hawker Siddeley (at the urging of the UK government) teamed with Breguet and Nord to study airbus designs. The Hawker Siddeley/Breguet/Nord groups HBN 100 became the basis for the continuation of the project. By 1966 the partners were Sud Aviation (France), Arbeitsgemeinschaft Airbus, later Deutsche Airbus (Germany) and Hawker Siddeley (UK).^[4] A request for funding was made to the three governments in October 1966.^[4]

By early 1967 the "A300" label began to be applied and the proposal developed into a 320 seat, twin engined airliner.^[4] On 25 July 1967 the three governments agreed to proceed to the definition stage with the mission statement:

Shortly after the agreement, Roger Béteille was appointed technical director of the A300 project.^[5] Béteille developed a division of labour which would be the basis of Airbus' production for years to come: France would manufacture the cockpit, flight control and the lower centre section of the fuselage; Hawker Siddeley, whose Trident technology had impressed him, was to manufacture the wings; Germany should make the forward and rear fuselage sections, as well as the upper centre section; The Dutch would make the flaps and spoilers; finally Spain (yet to become a full partner) would make the horizontal tailplane.^[5] On 26 September 1967 the German, French and British governments signed a Memorandum of Understanding in London which allowed continued development studies. This also confirmed Sud Aviation as the "lead company", that France and the UK would each have a 37.5% workshare with Germany taking 25%, and that Rolls-Royce would manufacture the engines.^[3][5]

In the two years following this agreement, both the British and French governments expressed doubts about the project. The MoU had stated that 75 orders must be achieved by 31 July 1968. However lukewarm airline support for a 300 seat Airbus A300 lead to the partners submitting the A250 proposal (what became the A300B) for a 250 seat airliner powered by existing engines.^[4] This dramatically reduced development costs, as the Rolls-Royce RB207 represented a large proportion of those costs. The RB207 had also suffered difficulties, Rolls-Royce was concentrating its efforts on the development of the related RB211 for the Lockheed L-1011.^[6] The French government threatened to withdraw from the project due to the concern over funding development of the Airbus A300, Concorde and the Dassault Mercure concurrently, but was persuaded otherwise.^[6] Having announced its concern at the A300B proposal in December 1968, and fearing it would not recoup its investment due to lack of sales, the British government announced its withdrawal on 10 April 1969.^[4] Germany took this opportunity to increase its share of the project to 50%.^[6] Given the participation by Hawker Siddeley up to that point, France and Germany were reluctant to take over its wing design. Thus the British company was allowed to continue as a privileged subcontractor.^[3] Hawker Siddeley invested GB£35 million in tooling and, requiring more capital, received a GB£35 million loan from the German government.^[6]

[edit] Formation of Airbus Industrie

Airbus A300, the first aircraft model launched by Airbus.

Airbus Industrie was formally established as a Groupement d'Interet Economique (Economic Interest Group or GIE) on 18 December 1970.^[6] The name "Airbus" was taken from a non-proprietary term used by the airline industry in the 1960s to refer to a commercial aircraft of a certain size and range, for this term was acceptable to the French linguistically. Aerospatiale and Deutsche Airbus each took a 36.5% share of production work, Hawker Siddeley 20% and Fokker-VFW 7%.^[4] Each company would deliver its sections as fully equipped, ready to fly items. In October 1971 the Spanish company CASA acquired a 4.2% share of Airbus Industrie, with Aerospatiale and Deutsche Airbus reducing their stakes to 47.9%.^[4] In January 1979 British Aerospace, which had absorbed Hawker Siddeley in 1977, acquired a 20% share of Airbus Industrie. The majority shareholders reduced their shares to 37.9%, while CASA retained its 4.2%.^[7]

In 1972, the A300 made its maiden flight and the first production model, the A300B2 entered service in 1974. Initially the success of the consortium was poor but by 1979 there were 81 aircraft in service. It was the launch of the A320 in 1981 that guaranteed the status of Airbus as a major player in the aircraft market - the aircraft had over 400 orders before it first flew, compared to 15 for the A300 in 1972.

[edit] Transition to Airbus SAS

The retention of production and engineering assets by the partner companies in effect made Airbus Industrie a sales and marketing company.^[8] This arrangement lead to inefficiencies due to the inherent conflict of interest that the four partner companies faced; They were both GIE shareholders and subcontractors to the consortium. The companies collaborated on development of the Airbus range, however they guarded the financial details of their own production activities and sought to maximise the transfer prices of their sub-assemblies.^[9][10]

In the early 1990s then Airbus CEO Jean Pierson argued that the GIE should be abandoned and Airbus established as a conventional company. However, the difficulties of integrating and valuing the assets of four companies as well as legal issues delayed the initiative. In December 1998, when it was reported that British Aerospace and DASA were close to merging, Aérospatiale paralysed negotiations on the Airbus conversion; The French company feared the combined BAe/DASA, which would own 57.9% of Airbus, would dominate the company and it insisted on a 50/50 split.^[11] However the issue was resolved in January 1999 when BAe abandoned talks with DASA in favour of merging with Marconi Electronic Systems to become BAE Systems. Then in 2000 three of the four partner companies (DaimlerChrysler Aerospace, successor to Deutsche Airbus; Aérospatiale-Matra, successor to Sud-Aviation; and CASA) merged to form EADS, simplifying the process. EADS now owned Airbus France, Airbus Deutschland and Airbus España, and thus 80% of Airbus Industrie.^[9] BAE Systems and EADS transferred their production assets to the new company, Airbus SAS, in return for shareholdings in that company.

[edit] BAE sale and A380 controversy

Airbus A380, the largest passenger jet in the world, entered commercial service in 2007.

On 6 April 2006 BBC News reported that BAE Systems was selling again its share, then "conservatively valued" at €3.5 billion (US$$4.17 bn).^[12] The move was seen by many analysts as a move to make partnerships with U.S. firms more feasible, in both financial and political terms.^[13] BAE originally sought to agree a price with EADS through an informal process. However, due to the slow pace of negotiations and disagreements over price, BAE exercised its put option which saw investment bank Rothschild appointed to give an independent valuation.

In June 2006, Airbus became embroiled in a significant international controversy over its announcement of a further delay in the delivery of its A380. In the wake of the announcement, the value of associated stock plunged by up to a quarter in a matter of days, although it soon recovered somewhat. Allegations of insider trading on the part of Noël Forgeard, CEO of EADS, its majority corporate parent, promptly followed. The loss of associated value caused great concern on the part of BAE, The Independent describing a "furious row" between BAE and EADS, with BAE believing the announcement was designed to depress the value of its share.^[14] A French shareholder group filed a class action lawsuit against EADS in a Dutch court for failing to inform investors of the financial implications of the A380 delays while airlines to which deliveries were promised are expected to demand compensation.^[15] As a result, EADS chief Noël Forgeard and Airbus CEO Gustav Humbert announced their resignations on 2 July 2006.^[16] Forgeard's severance package is expected to include three years of salary plus the 2005 bonus; a total of at least €6 million, possibly topping €7 million.^[15]

On 2 July 2006 Rothschild valued BAE's stake at £1.9 billion (€2.75 billion); well below the expectation of BAE, analysts and even EADS.^[17] On 5 July BAE appointed independent auditors to study why the value of its share of Airbus had fallen from the original estimates to the Rothschild valuation. They pushed back any potential sale until September at the earliest.^[18] On 6 September 2006 BAE agreed to sell its stake in Airbus to EADS for £1.87 billion (€2.75 billion, $3.53 billion), pending BAE shareholder approval.^[19] On 4 October shareholders voted in favour of the sale.^[20]

On 9 October 2006 Christian Streiff, Humbert's successor, resigned due to differences with parent company EADS over the amount of independence he would be granted in implementing his reorganization plan for Airbus. He will be succeeded by EADS co-CEO Louis Gallois. This brings Airbus under more direct control of its parent company.

[edit] 2007 restructuring

On 28 February 2007, CEO Louis Gallois announced the company's restructuring plans. Entitled Power⁸, the plan would see 10,000 jobs cut over four years; 4,300 in France, 3,700 in Germany, 1,600 in the UK and 400 in Spain. 5,000 of the 10,000 would be at sub contractors. Plants at Saint Nazaire, Varel and Laupheim face sell off or closure, while Meaulte, Nordenham and Filton are "open to investors".^[21] The announcements have resulted in Airbus unions in France to strike, with German Airbus workers possibly following [3].

Airbus A320, the first model in the A318, A319, A320 and A321 range of airliners

[edit] Civilian products

The Airbus product line started with the A300, the world's first twin-aisle, twin-engined aircraft. A shorter, re-winged, re-engined variant of the A300 is known as the A310. Building on its success, Airbus launched the A320 with its innovative fly-by-wire control system. The A320 has been, and continues to be, a great commercial success. The A318 and A319 are shorter derivatives with some of the latter under construction for the corporate biz-jet market (Airbus Corporate Jet). A stretched version is known as the A321 and is proving competitive with later models of the Boeing 737.

The longer range products, the twin-jet A330 and the four-engine A340, have efficient wings, enhanced by winglets. The Airbus A340-500 has an operating range of 16 700 kilometres (9000 nautical miles), the second longest range of any commercial jet after the Boeing 777-200LR (range of 17 446 km or 9420 nautical miles). The company is particularly proud of its use of fly-by-wire technologies and the common cockpit and systems in use throughout the aircraft family, which make it much easier to train crew.

Airbus is studying a replacement for the A320 series, tentatively dubbed NSR, for "New Short-Range aircraft."^[22]

In July 2007, Airbus delivered its last A300 to FedEx, marking the end of the A300/A310 production line. Airbus intends to relocate Toulouse A320 final assembly activity to Hamburg, and A350/A380 production in the opposite direction as part of its Power8 organization plan begun under ex-CEO Christian Streiff.^[23]

Airbus supplied replacement parts and service for the Concorde until its retirement in 2003.

[edit] Competition with Boeing

Main article: Competition between Airbus and Boeing

Plane net orders 2002-2006

Airbus is in tight competition with Boeing every year for aircraft orders. Though both manufacturers have a broad product range in various segments from single-aisle to wide-body, both manufacturers' offerings do not always compete head-to-head. Instead they respond with models a bit smaller or a bit bigger than the other in order to plug any holes in demand and achieve a better edge. The A380, for example, is designed to be a bit bigger than the 747. The A350 XWB competes with the high end of the 787 and the low end of the 777. The A320 is bigger than the 737-700 but smaller than the 737-800. The A321 is bigger than the 737-900 but smaller than the previous 757-200. Airlines see this as a benefit since they get a more complete product range from 100 seats to 500 seats than if both companies offered identical aircraft.

In recent years the Boeing 777 has outsold its Airbus counterparts, which include the A340 family as well as the A330-300. The smaller A330-200 competes with the 767, outselling its Boeing counterpart in recent years. The A380 is anticipated to further reduce sales of the Boeing 747, gaining Airbus a share of the market in very large aircraft, though frequent delays in the A380 program have caused several customers to consider the refreshed 747-8.^[25] Airbus has also proposed the A350 XWB to compete with the fast-selling Boeing 787, after being under great pressure from airlines to produce a competing model.

There are around 4,463 Airbus aircraft in service, with Airbus managing to win over 50 per cent of aircraft orders in recent years. Airbus products are still outnumbered 6 to 1 by in-service Boeings (there are over 5,000 Boeing 737s alone in service). This however is indicative of historical success - Airbus made a late entry into the modern jet airliner market (1972 vs. 1958 for Boeing).

Airbus won a greater share of orders in 2003, 2004. It also delivered more aircraft in 2003, 2004, 2005 & 2006.

In 2005, Airbus made a claim to victory again with 1111 (1055 net),^[26] compared to 1029 (net of 1002) for Boeing^[26] However, Boeing won 55% of 2005 orders by value, due to that firm winning several important widebody sales at the expense of Airbus.

In 2006 Boeing won more orders by both measures. Airbus regained parity as of mid-2007.

[edit] Orders

[edit] Deliveries

[edit] Subsidies

Boeing has continually protested over "launch aid" and other forms of government aid to Airbus, while Airbus has argued that Boeing receives illegal subsidies through military and research contracts and tax breaks.

In July 2004 Harry Stonecipher (then-Boeing CEO) accused Airbus of abusing a 1992 bilateral EU-US agreement providing for disciplines for large civil aircraft support from governments. Airbus is given reimbursable launch investment (RLI, called "launch aid" by the US) from European governments with the money being paid back with interest, plus indefinite royalties, but only if the aircraft is a commercial success.^[26] Airbus contends that this system is fully compliant with the 1992 agreement and WTO rules. The agreement allows up to 33 per cent of the programme cost to be met through government loans which are to be fully repaid within 17 years with interest and royalties. These loans are held at a minimum interest rate equal to the cost of government borrowing plus 0.25%, which would be below market rates available to Airbus without government support.^[26] Airbus claims that since the signature of the EU-U.S. Agreement in 1992, it has repaid European governments more than U.S.$6.7 billion and that this is 40% more than it has received.^[26]

Airbus argues that the pork barrel military contracts awarded to Boeing (the second largest U.S. defence contractor) are in effect a form of subsidy (see the Boeing KC-767 military contracting controversy). The significant U.S. government support of technology development via NASA also provides significant support to Boeing, as does the large tax breaks offered to Boeing which some claim are in violation of the 1992 agreement and WTO rules. In its recent products such as the 787, Boeing has also been offered direct financial support from local and state governments.^[27] However it has been argued that in U.S. government support of technology development, anyone can benefit from the results; even Airbus can benefit from them.

In January 2005 the European Union and United States trade representatives, Peter Mandelson and Robert Zoellick (since replaced by Rob Portman) respectively, agreed to talks aimed at resolving the increasing tensions. These talks were not successful with the dispute becoming more acrimonious rather than approaching a settlement.

[edit] World Trade Organization litigation

On 31 May 2005 the United States filed a case against the European Union for providing allegedly illegal subsidies to Airbus. Twenty-four hours later the European Union filed a complaint against the United States protesting support for Boeing.^[26]

Portman (from the USA) and Mandelson (from the EU) issued a joint statement stating: "We remain united in our determination that this dispute shall not affect our cooperation on wider bilateral and multilateral trade issues. We have worked together well so far, and intend to continue to do so."

Tensions increased by the support for the Airbus A380 have erupted into a potential trade war due to the upcoming launch of the Airbus A350. Airbus would ideally like the A350 programme to be launched with the help of state loans covering a third of the development costs although it has stated it will launch without these loans if required. The A350 will compete with Boeing's most successful project in recent years, the 787 Dreamliner.

EU trade officials are questioning the funding provided by NASA, the Department of Defense (in particular in the form of R&D contracts that benefited Boeing) as well as funding from US states (in particular the State of Washington, the State of Kansas and the State of Illinois) for the launch of Boeing aircraft, in particular the 787.

[edit] Military products

Main article: Airbus Military

In January 1999 Airbus established a separate company, Airbus Military S.A.S., to undertake development and production of a turboprop powered tactical transport aircraft (the Airbus Military A400M.) The A400M is being developed by several NATO members, Belgium, France, Germany, Luxembourg, Spain, Turkey, and the UK, as an alternative to the C-130 Hercules. Expansion in the military aircraft market will reduce, but not negate, Airbus' exposure to the effects of cyclical downturns in civil aviation.

[edit] International manufacturing presence

The main Airbus factory in Toulouse is located just next to Toulouse Blagnac International Airport. ( 43°36′44″N, 1°21′47″E)

The three final assembly lines of Airbus are in Toulouse (France) (two assembly lines) and Hamburg (Germany) (one assembly line). A fourth final assembly line, for the Airbus A400M, is under construction in Seville (Spain). It is estimated that this new assembly line will be operational by October 2006.

Airbus, however, has a number of other plants in different European locations, reflecting its foundation as a consortium. An original solution to the problem of moving aircraft parts between the different factories and the assembly plants is the use of "Beluga" specially enlarged jets, capable of carrying entire sections of fuselage of Airbus aircraft. This solution has also been investigated by Boeing, who retrofitted 3 of their 747 aircraft to transport the components of the 787. An exception to this scheme is the A380, whose fuselage and wings are too large for sections to be carried by the Beluga. Large A380 parts are brought by ship to Bordeaux, and then transported to the Toulouse assembly plant by a specially enlarged road.

North America is an important region to Airbus in terms of both aircraft sales and suppliers. 2,000 of the total of approximately 5,300 Airbus jetliners sold by Airbus around the world, representing every aircraft in its product line from the 107-seat A318 to the 565-passenger A380, are ordered by North American customers. According to Airbus, US contractors supporting an estimated 120,000 jobs earned estimated $5.5 billion (2003) worth of business. For example, one version of the A380 has 51% American content in terms of work share value.

EADS Airbus will be opening an assembly plant in Tianjin, China for its A320 series airliners, to be operational in 2009. AVIC I and AVIC II will be EADS' local partners for the site, to which sub-assemblies will be sent from plants around the world.^[28]

[edit] Employment data

[edit] Workforce by countries

Country	Airbus direct employees
France	17,000
Germany	19,250
United Kingdom	11,500
Spain	3,000
United States	~700[29]
People's Republic of China	?
Total	全站熱搜 創作者介紹 beeway BW Professional Cutter Expert www.tool-tool.com beeway 發表在 痞客邦 留言(0) 人氣() E-mail轉寄 全站分類：進修深造 個人分類：學術研究 此分類上一篇： Airbus www.tool-tool.com 此分類下一篇： Airbus www.tool-tool.com 上一篇： Airbus www.tool-tool.com 下一篇： Airbus www.tool-tool.com 歷史上的今天 2009: 机械加工表面质量 www.tool-tool.com 2009: 磨削的基本原理及其加工能力 www.tool-tool.com 2009: 如何使硬质合金锯片用得更好 www.tool-tool.com 2009: 如何根据刀具材料来选择切削液 www.tool-tool.com 2008: H2O-705金屬特殊化學鍵結應用www.tool-tool.com 2008: メタルボンド www.tool-tool.com 2007: 整体硬质合金立铣刀www.tool-tool.com 2007: Метод Роквелла www.tool-tool.com 2007: Dureza Rockwell www.tool-tool.com 2007: Dureza Rockwell www.tool-tool.com 2007: Dureté (matériau)www.tool-tool.com 2007: Rockwell (Einheit) www.tool-tool.com 2007: Rockwell scale www.tool-tool.com 2007: Rockwell (skala)www.tool-tool.com 2007: Zkouška tvrdosti podle Rockwella www.tool-tool.com 2007: Duresa Rockwell www.tool-tool.com 2007: BW專業焊刃式切刀 www.tool-tool.com 2007: BW專業側銑刀 Cutting tool www.tool-tool.com 2007: BW專業滾輪刀具 www.tool-tool.com 2007: 模具选材原则 www.tool-tool.com 2007: 常用原料性质及加工工艺介紹www.tool-tool.com 2007: 快速模具价格计算法www.tool-tool.com 2007: 長榮築夢 航太業起飛www.tool-tool.com 2007: 美國波音公司與長榮航太共同完成www.tool-tool.com 2007: 長榮航太與波音合作 改裝747客機為超大貨機www.tool-tool.com 2007: 航太業的民間力量www.tool-tool.com 2007: 長榮航太 企圖心戰勝零經驗www.tool-tool.com 2007: 空中巴士www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: إيرباص www.tool-tool.com 2007: Еърбъс www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: 衡量個人成熟度的四個指標 www.tool-tool.com 2007: CAM在注塑模具加工中的应用www.tool-tool.com 2007: 进出口行业词汇英语翻译(C) www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: איירבוס www.tool-tool.com 2007: Airbus [szerkesztés] www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: エアバス www.tool-tool.com 2007: აერობუსი www.tool-tool.com 2007: 에어버스 www.tool-tool.com 2007: Laophorum aerium www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: എയര്‍ബസ്‌ www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: 高效切削在航空发动机制造业上的应用www.tool-tool.com 2007: インコネルのエンドミル加工www.tool-tool.com 2007: 微細加工 ( Micro Machining ) www.tool-tool.com 2007: 主偏角的功用和选择www.tool-tool.com 2007: 车刀几何角度如何测量www.tool-tool.com 2007: 可以降低循环时间及刀具成本的新工艺www.tool-tool.com 2007: 非球面透镜的磨制与检测www.tool-tool.com 2007: 成形铣刀斜向铲磨用砂轮截形的计算www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: แอร์บัส www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: Airbus www.tool-tool.com 2007: עירבוס www.tool-tool.com 2007: Light metals www.tool-tool.com 2007: Leichtmetalle www.tool-tool.com 2007: მსუბუქი ლითონი www.tool-tool.com 2007: Lättmetall www.tool-tool.com 2007: CNC www.tool-tool.com 2007: التصنيع باستخدام الحاسب الآلي www.tool-tool.com 2007: CNC-maskine www.tool-tool.com 2007: Computerized Numerical Control www.tool-tool.com 2007: CNC www.tool-tool.com 2007: Perkomputile ciferece stirata www.tool-tool.com 2007: Arvprogrammjuhtimine www.tool-tool.com 2007: سی‌ان‌سی www.tool-tool.com 2007: CNC [szerkesztés] www.tool-tool.com 2007: Computer numerical control www.tool-tool.com 2007: CNC www.tool-tool.com 2007: CNC www.tool-tool.com 2007: CNC www.tool-tool.com 2007: CNC www.tool-tool.com 2007: CNC www.tool-tool.com 2007: CNC www.tool-tool.com 2007: CNC www.tool-tool.com 2007: 電腦輔助設計 www.tool-tool.com 2007: Rekenaargesteunde ontwerp www.tool-tool.com 2007: CAD www.tool-tool.com 2007: Computer aided design www.tool-tool.com 2007: 材料的表面改性与涂覆技术www.tool-tool.com ▲top 留言列表 發表留言 近期文章 熱門文章 文章分類 BW新品介紹 (6) 機械類介紹 (1) 刀具加工知識大百科 (41) BW NEWS (32) 學術研究 (9512) 刀具展示區 (212) 企管財經 (58) 文化小品 (162) 未分類文章 (59) 最新迴響 月曆 « 十一月 2024 » 日 一 二 三 四 五 六           1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30               網誌搜尋 我的連結 好友連結 元福麻油廠 碧威股份有限公司 Beewise inc. 新聞交換(RSS) POWERED BY (登入) 最新站方公告 [公告] PIXNET 刪除長期未登入帳號通知 [公告] 「行動管家」APP 已於 2024 年 5 月 22 日下架 [公告] 「新型態文章」已於 2024 年 6 月 28 日終止服務 參觀人氣 本日人氣： 累積人氣： 回到頁首 回到主文 免費註冊 客服中心 痞客邦首頁 © 2003 - 2024 PIXNET 關閉視窗