BW公司開發新型四刃鑽鉸孔刀具，針對碳纖維，玻璃纖維與石墨纖維複合材料加工，因特殊刀具材料與切削排屑方式，改善刀具在切割複合材料，能使刀具穩定切割無毛邊現象，排屑方式能產生顆粒粉末狀。BW鑽鉸刀玻纖切削加工測試
- 10月 02 週三 201310:03
BW鑽刀碳纖維與玻璃纖維材質加工測試
BW公司開發新型四刃鑽鉸孔刀具，針對碳纖維，玻璃纖維與石墨纖維複合材料加工，因特殊刀具材料與切削排屑方式，改善刀具在切割複合材料，能使刀具穩定切割無毛邊現象，排屑方式能產生顆粒粉末狀。BW鑽鉸刀玻纖切削加工測試
- 10月 07 週日 201210:45
不銹鋼專用切削刀具-金屬陶瓷銑刀
許多難加工材料應用廣泛，其中難加工材料，如不銹鋼中Cr和Ni含量較高，Cr雖能提高不銹鋼的強度和韌性，但增加了不銹鋼與刀具的粘結傾向；Ni可起到穩定組織的作用，但組織塑性大，容易引起加工硬化，採用鎢鈷類硬質合金刀具進行加工，但加工效果並不十分理想。
碧威不銹鋼專用切削刀具是以最新金屬陶瓷材料製作而成，針對成分內含鎳18%以上的難切削材而開發，擁有更好的抗折強度及濕式切削，加工時有更優越的耐損性和穩定性，在加工不銹鋼切削壽命更是鎢鋼刀具5倍以上且在切削表面具有優異的表現。
- 6月 22 週五 201216:29
擴散粒子 - BW產品
一般擴散粒子(Diffusion beads)包括有機材質之壓克力樹脂(PMMA)或聚苯乙烯(PS)或共聚PMMA-PS等多種高分子材質，具真圓狀的外型或多孔、絨毛、中空等行裝‧配合光學膜或其他用途，他可調控折射率、著色率、分散性、流動性、光反射性及彈性、接著性等。主要應用為LED背光模組擴散膜之光擴散劑及LED燈具擴散膜及其他光學塗層等。
- 5月 11 週五 201209:22
Common mode Choke Inductor machine
BW supply and organize full production lines according to demand of Common Mode inductor producing. Common Mode Inductor whole production line: automatic winding two-lane special equipment, inductor-based visual positioning assembly machine, inductive type high-speed assembly machine, and automatic packaging machine. Common mode Choke, also known as common mode chokes for switching power supply, which is an important part of inverter, UPS power supplies and other equipment.
Winding Machine
Inductor Auto Mount Machine For 2012
Inductor Auto Mount Machine For 1608
Taping Machine
2.Operation rate:95%
3.Chips size :2012
4.Throughput :8s/pcs
2.Operation rate : 99.8%
3.Chips size : 2012
4.Throughput : 2 sec. / 2 pcs
2.Operation rate:99%
3.Chips size : 1608
4.Throughput : <2 sec. / 1pcs
2.operation rate :99%
3.chips size :3216~1210
4.throughput :2 pcs / sec.
- 5月 04 週五 201213:52
Circular saw with metal ceramic blade
BW’s advanced metal-ceramic brazed circular saw has better flexural strength in machining high hardness alloy which content 18% up of Ni and more superior damage resistance and stable quality in wet machining than HSS saw.
Characteristics of metal ceramic：
- 5月 04 週五 201210:51
90° Step Drill
Step drill, the related accuracy in manufacture process is the most important factor for cutting quality. If the precision isn’t controlled well, it will cause hole too rough and even caused reject of work piece. Not only geometry, specification, accuracy, and surface quality, but also the drill volume are important points for the cutting quality of step drill.
During drill process, if the chip groove isn’t well-produced, it would happen wall friction, extrusion, brushed and scratches on its surface. It will cause the bad quality of working surface and obstruction, drill bit stuck, and even broken the drill bit.
1
