BW Professional Cutter Expert www.tool-tool.com

Bewise Inc. www.tool-tool.com Reference source from the internet.

The use of nickel has been traced as far back as 3500 BC, but it was first isolated and classified as a chemical element in 1751 by Axel Fredrik Cronstedt, who initially mistook its ore for a copper mineral. Its most important ore minerals are laterites, including limonite and garnierite, and pentlandite. Major production sites include Sudbury region in Canada, New Caledonia and Norilsk in Russia. The metal is corrosion-resistant, finding many uses in alloys, as a plating, in the manufacture of coins, magnets and common household utensils, as a catalyst for hydrogenation, and in a variety of other applications. Enzymes of certain life-forms contain nickel as an active center, which makes the metal an essential nutrient for those life forms.

Atomic

The electronic configuration of isolated nickel atom is counterintuitive: direct investigation

finds that the predominant electron structure of nickel is [Ar] 4s¹ 3d⁹, which is the more stable form because of relativistic effects. Whereas Hund's rule, which works well for most other elements, predicts an electron shell structure of [Ar] 3d⁸ 4s² (the symbol [Ar] refers to the argon-like core structure). This latter configuration is found in many chemistry textbooks and is also written as [Ar] 4s² 3d⁸, to emphasize that the 3d shell is the electron shell being filled by the highest-energy electrons.

Physical

Nickel is a silvery-white metal with a slight golden tinge that takes a high polish. It is one of only four elements that are magnetic at or near room temperature. Its Curie temperature is 355 °C. That is, nickel is non-magnetic above this temperature.The unit cell of nickel is a face centered cube with the lattice parameter of 0.352 nm giving an atomic radius of 0.124 nm. Nickel belongs to the transition metals and is hard and ductile.

Isotopes

Main article: Isotopes of nickel

Naturally occurring nickel is composed of 5 stable isotopes; ⁵⁸Ni, ⁶⁰Ni, ⁶¹Ni, ⁶²Ni and ⁶⁴Ni with ⁵⁸Ni being the most abundant (68.077% natural abundance). ⁶²Ni is one of the most stable nuclides of all the existing elements, second in stability only to ⁵⁶Fe. 18 radioisotopes have been characterised with the most stable being ⁵⁹Ni with a half-life of 76,000 years, ⁶³Ni with a half-life of 100.1 years, and ⁵⁶Ni with a half-life of 6.077 days. All of the remaining radioactive isotopes have half-lives that are less than 60 hours and the majority of these have half-lives that are less than 30 seconds. This element also has 1 meta state.

Nickel-56 is produced by the silicon burning process and later set free in large quantities during type Ia supernovae. Indeed, the shape of the light curve of these supernovae at intermediate to late-times corresponds to the decay via electron capture of nickel-56 to cobalt-56 and ultimately to iron-56.Nickel-59 is a long-lived cosmogenic radionuclide with a half-life of 76,000 years. ⁵⁹Ni has found many applications in isotope geology. ⁵⁹Ni has been used to date the terrestrial age of meteorites and to determine abundances of extraterrestrial dust in ice and sediment. Nickel-60 is the daughter product of the extinct radionuclide ⁶⁰Fe, which decays with a half-life of 2.6 million years. Because ⁶⁰Fe has such a long half-life, its persistence in materials in the solar system at high enough concentrations may have generated observable variations in the isotopic composition of ⁶⁰Ni. Therefore, the abundance of ⁶⁰Ni present in extraterrestrial material may provide insight into the origin of the solar system and its early history. Nickel-62 has the highest binding energy per nucleon of any isotope for any element (8.7946 Mev/nucleon). Isotopes heavier than ⁶²Ni cannot be formed by nuclear fusion without losing energy. Nickel-48, discovered in 1999, is the most proton-rich heavy element isotope known. With 28 protons and 20 neutrons ⁴⁸Ni is "double magic" (like ²⁰⁸Pb) and therefore unusually stable.The isotopes of nickel range in atomic weight from 48 u (⁴⁸Ni) to 78 u (⁷⁸Ni). Nickel-78's half-life was recently measured to be 110 milliseconds and is believed to be an important isotope involved in supernova nucleosynthesis of elements heavier than iron.

Chemical

See also: Category:Nickel compounds

Tetracarbonyl nickel

The most common oxidation state of nickel is +2, but compounds of Ni⁰, Ni⁺, and Ni³⁺ are well known, and Ni⁴⁺ has been demonstrated

Nickel(0)

Tetracarbonylnickel (Ni(CO)₄), discovered by Ludwig Mond,is a volatile liquid at room temperature. On heating, the complex decomposes back to nickel and carbon monoxide:

Ni(CO)₄ Ni + 4 CO

This behavior is exploited in the Mond process for purifying nickel, as described above.^[11] The related nickel(0) complex bis(cyclooctadiene)nickel(0) is a useful catalyst in organonickel chemistry due to the easily displaced cod ligands.

Nickel(II)

Nickel sulfate crystals

Nickel(II) compounds are known with all common anions, i.e. the sulfide, sulfate, carbonate, hydroxide, carboxylates, and halides. Nickel(II) sulfate is produced in large quantities by dissolving nickel metal or oxides in sulfuric acid. It exists as both a hexa- and heptahydrates.This compound is useful for electroplating nickel.

The four halogens form nickel compounds, all of which adopt octahedral geometries. Nickel(II) chloride is of particular significance, and its behavior is illustrative of the other halides. Nickel(II) chloride is produced by dissolving nickel residues in hydrochloric acid. The dichloride is usually encountered as the green hexahydrate, but it can be dehydrated to give the yellow anhydrous NiCl₂. Some tetracoordinate nickel(II) complexes form both tetrahedral and square planar geometries. The tetrahedral complexes are paramagnetic and the square planar complexes are diamagnetic. This equilibrium as well as the formation of octahedral complexes contrasts with the behavior of the divalent complexes of the heavier group 10 metals, palladium(II) and platinum(II), which tend to adopt only square-planar complexes.^[10]

Nickelocene is known; it has an electron count of 20, making it relatively unstable.

Nickel(III)

Nickel(III) oxide is used as the cathode in many rechargeable batteries, including nickel-cadmium, nickel-iron, nickel hydrogen, and nickel-metal hydride, and used by certain manufacturers in Li-ion batteries

Creation

The stable form of nickel is created in supernovas via the r-process.

History

Because the ores of nickel are easily mistaken for ores of silver, understanding of this metal and its use dates to relatively recent times. However, the unintentional use of nickel is ancient, and can be traced back as far as 3500 BC. Bronzes from what is now Syria had contained up to 2% nickel.Further, there are Chinese manuscripts suggesting that "white copper" (cupronickel, known as baitung) was used there between 1700 and 1400 BC. This Paktong white copper was exported to Britain as early as the 17th century, but the nickel content of this alloy was not discovered until 1822.In medieval Germany, a red mineral was found in the Erzgebirge (Ore Mountains) which resembled copper ore. However, when miners were unable to extract any copper from it they blamed a mischievous sprite of German mythology, Nickel (similar to Old Nick) for besetting the copper. They called this ore Kupfernickel from the German Kupfer for copper. This ore is now known to be nickeline or niccolite, a nickel arsenide. In 1751, Baron Axel Fredrik Cronstedt was attempting to extract copper from kupfernickel and obtained instead a white metal that he named after the spirit which had given its name to the mineral, nickel.In modern German, Kupfernickel or Kupfer-Nickel designates the alloy cupronickel.

In the United States, the term "nickel" or "nick" was originally applied to the copper-nickel Indian cent coin introduced in 1859. Later, the name designated the three-cent coin introduced in 1865, and the following year the five-cent shield nickel appropriated the designation, which has remained ever since. Coins of pure nickel were first used in 1881 in Switzerland.After its discovery the only source for nickel was the rare Kupfernickel, but from 1824 on the nickel was obtained as byproduct of cobalt blue production. The first large scale producer of nickel was Norway, which exploited nickel rich pyrrhotite from 1848 on. The introduction of nickel in steel production in 1889 increased the demand for nickel and the nickel deposits of New Caledonia, which were discovered in 1865, provided most of the world's supply between 1875 and 1915. The discovery of the large deposits in the Sudbury Basin, Canada in 1883, in Norilsk-Talnakh, Russia in 1920 and in the Merensky Reef, South Africa in 1924 made large-scale production of nickel possible.

Occurrence

See also: Ore genesis and Category:Nickel minerals

Widmanstätten pattern showing the two forms of Nickel-Iron, Kamacite and Taenite, in an octahedrite meteorite

The bulk of the nickel mined comes from two types of ore deposits. The first are laterites where the principal ore minerals are nickeliferous limonite: (Fe, Ni)O(OH) and garnierite (a hydrous nickel silicate): (Ni, Mg)₃Si₂O₅(OH). The second are magmatic sulfide deposits where the principal ore mineral is pentlandite: (Ni, Fe)₉S₈.

In terms of supply, the Sudbury region of Ontario, Canada, produces about 30% of the world's supply of nickel. The Sudbury Basin deposit is theorized to have been created by a meteorite impact event early in the geologic history of Earth. Russia contains about 40% of the world's known resources at the Norilsk deposit in Siberia. The Russian mining company MMC Norilsk Nickel obtains the nickel and the associated palladium for world distribution. Other major deposits of nickel are found in New Caledonia, France, Australia, Cuba, and Indonesia. Deposits found in tropical areas typically consist of laterites which are produced by the intense weathering of ultramafic igneous rocks and the resulting secondary concentration of nickel bearing oxide and silicate minerals. Recently, a nickel deposit in western Turkey had been exploited, with this location being especially convenient for European smelters, steelmakers and factories. The one locality in the United States where nickel was commercially mined is Riddle, Oregon, where several square miles of nickel-bearing garnierite surface deposits are located. The mine closed in 1987.In 2005, Russia was the largest producer of nickel with about one-fifth world share closely followed by Canada, Australia and Indonesia, as reported by the British Geological Survey.

Based on geophysical evidence, most of the nickel on Earth is postulated to be concentrated in the Earth's core. Kamacite and taenite are naturally occurring alloys of iron and nickel. For kamacite the alloy is usually in the proportion of 90:10 to 95:5 although impurities such as cobalt or carbon may be present, while for taenite the nickel content is between 20% and 65%. Kamacite and taenite occur in nickel-iron meteorites.

Extraction and purification

Nickel output in 2005

Nickel is recovered through extractive metallurgy. Most sulfide ores have traditionally been processed using pyrometallurgical techniques to produce a matte for further refining. Recent advances in hydrometallurgy have resulted in recent nickel processing operations being developed using these processes. Most sulfide deposits have traditionally been processed by concentration through a froth flotation process followed by pyrometallurgical extraction.

Nickel is extracted from its ores by conventional roasting and reduction processes which yield a metal of greater than 75% purity. Final purification of nickel oxides is performed via the Mond process, which increases the nickel concentrate to greater than 99.99% purity. This process was patented by L. Mond and was used in South Wales in the 20th century. Nickel is reacted with carbon monoxide at around 50 °C to form volatile nickel carbonyl. Any impurities remain solid while the nickel carbonyl gas passes into a large chamber at high temperatures in which tens of thousands of nickel spheres, called pellets, are constantly stirred. The nickel carbonyl decomposes, depositing pure nickel onto the nickel spheres. Alternatively, the nickel carbonyl may be decomposed in a smaller chamber at 230 °C to create fine nickel powder. The resultant carbon monoxide is re-circulated through the process. The highly pure nickel produced by this process is known as carbonyl nickel. A second common form of refining involves the leaching of the metal matte followed by the electro-winning of the nickel from solution by plating it onto a cathode. In many stainless steel applications, 75% pure nickel can be used without further purification depending on the composition of the impurities.

Nickel sulfide ores undergo flotation (differential flotation if Ni/Fe ratio is too low) and then are smelted. After producing the nickel matte, further processing is done via the Sherritt-Gordon process. First copper is removed by adding hydrogen sulfide, leaving a concentrate of only cobalt and nickel. Solvent extraction then efficiently separates the cobalt and nickel, with the final nickel concentration greater than 99%.

Metal value

The market price of nickel surged throughout 2006 and the early months of 2007; as of April 5, 2007, the metal was trading at 52,300 USD/tonne or 1.47 USD/oz.^[26] The price subsequently fell dramatically from these peaks, and as of 19 January 2009 the metal was trading at 10,880 USD/tonne.The US nickel coin contains 0.04 oz (1.25 g) of nickel, which at the April 2007 price was worth 6.5 cents, along with 3.75 grams of copper worth about 3 cents, making the metal value over 9 cents. Since the face value of a nickel is 5 cents, this made it an attractive target for melting by people wanting to sell the metals at a profit. However, the United States Mint, in anticipation of this practice, implemented new interim rules on December 14, 2006, subject to public comment for 30 days, which criminalize the melting and export of cents and nickels.Violators can be punished with a fine of up to $10,000 and/or imprisoned for a maximum of five years.

As of June 24, 2009 the melt value of a U.S. nickel is $0.0363145 which is less than the face value.

Applications

Nickel superalloy jet engine (RB199) turbine blade

Nickel is used in many industrial and consumer products, including stainless steel, magnets, coinage, rechargeable batteries, electric guitar strings and special alloys. It is also used for plating and as a green tint in glass. Nickel is pre-eminently an alloy metal, and its chief use is in the nickel steels and nickel cast irons, of which there are many varieties. It is also widely used in many other alloys, such as nickel brasses and bronzes, and alloys with copper, chromium, aluminium, lead, cobalt, silver, and gold.

Nickel plated neodymium magnet on a bracket from a hard drive.

The amounts of nickel used for various applications are 60% used for making nickel steels, 14% used in nickel-copper alloys and nickel silver, 9% used to make malleable nickel, nickel clad, Inconel and other superalloys, 6% used in plating, 3% use for nickel cast irons, 3% in heat and electric resistance alloys, such as Nichrome, 2% used for nickel brasses and bronzes with the remaining 3% of the nickel consumption in all other applications combined.^[ In the laboratory, nickel is frequently used as a catalyst for hydrogenation, sometimes Raney nickel, a finely divided form of the metal alloyed with aluminium which adsorbs hydrogen gas. Nickel is often used in coins, or occasionally as a substitute for decorative silver. The American 'nickel' five-cent coin is 75% copper and 25% nickel. The Canadian nickel minted at various periods between 1922-81 was 99.9% nickel, and was magnetic.Various other nations have historically used and still use nickel in their coinage.

Nickel is also used in fire assay as a collector of platinum group elements, as it is capable of full collection of all 6 elements, in addition to partial collection of gold. This is seen through the nature of nickel as a metal, as high throughput nickel mines may run PGE recovery (primarily platinum and palladium), such as Norilsk in Russia and the Sudbury Basin in Canada.

Nickel foam or nickel mesh is used in gas diffusion electrodes for alkaline fuel cells.

Biological role

Although not recognized until the 1970s, nickel plays important roles in the biology of microorganisms and plants. In fact urease (an enzyme which assists in the hydrolysis of urea) contains nickel. The NiFe-hydrogenases contain nickel in addition to iron-sulfur clusters. Such [NiFe]-hydrogenases characteristically oxidise H₂. A nickel-tetrapyrrole coenzyme, F430, is present in the methyl coenzyme M reductase which powers methanogenic archaea. One of the carbon monoxide dehydrogenase enzymes consists of an Fe-Ni-S cluster. Other nickel-containing enzymes include a class of superoxide dismutaseand a glyoxalase.

Toxicity

Exposure to nickel metal and soluble compounds should not exceed 0.05 mg/cm³ in nickel equivalents per 40-hour work week. Nickel sulfide fume and dust is believed to be carcinogenic, and various other nickel compounds may be as well.^[39][40] Nickel carbonyl, [Ni(CO)₄], is an extremely toxic gas. The toxicity of metal carbonyls is a function of both the toxicity of the metal as well as the carbonyl's ability to give off highly toxic carbon monoxide gas, and this one is no exception. It is explosive in air.^[41][42] Sensitized individuals may show an allergy to nickel affecting their skin, also known as dermatitis. Sensitivity to nickel may also be present in patients with pompholyx. Nickel is an important cause of contact allergy, partly due to its use in jewellery intended for pierced ears.^[43] Nickel allergies affecting pierced ears are often marked by itchy, red skin. Many earrings are now made nickel-free due to this problem. The amount of nickel which is allowed in products which come into contact with human skin is regulated by the European Union. In 2002 researchers found amounts of nickel being emitted by 1 and 2 Euro coins far in excess of those standards. This is believed to be due to a galvanic reaction.It was voted Allergen of the Year in 2008 by the American Contact Dermatitis Society.

歡迎來到Bewise Inc.的世界，首先恭喜您來到這接受新的資訊讓產業更有競爭力， 我們是提供專業刀具製造商，應對客戶高品質的刀具需求，我們可以協助客戶滿足您對產業的不同要求，我們有能力達到非常卓越的客戶需求品質，這是現有相關技 術無法比擬的，我們成功的滿足了各行各業的要求，包括：精密HSS DIN切削刀具、協助客戶設計刀具流程、DIN or JIS 鎢鋼切削刀具設計、NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計、超高硬度的切削刀具、醫療配件刀具設計、複合式再研磨機、PCD地板專用企口鑽石組合刀 具、粉末造粒成型機、主機版專用頂級電桿、PCD V-Cut刀、捨棄式圓鋸片組、粉末成型機、航空機械鉸刀、主機版專用頂級電感、’汽車業刀具設計、電子產業鑽石刀具、木工產業鑽石刀具、銑刀與切斷複合再研磨機、銑刀與鑽頭複合再研磨機、銑刀與螺絲攻複合再研磨機等等。我們的產品涵蓋了從民生 刀具到工業級的刀具設計；從微細刀具到大型刀具；從小型生產到大型量產；全自動整合；我們的技術可提供您連續生產的效能，我們整體的服務及卓越的技術，恭 迎您親自體驗！！

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users’ demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting tool、aerospace tool .HSS  DIN Cutting tool、Carbide end mills、Carbide cutting tool、NAS Cutting tool、NAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end mill、disc milling cutter,Aerospace cutting tool、hss drill’Фрезеры’Carbide drill、High speed steel、Compound Sharpener’Milling cutter、INDUCTORS FOR PCD’CVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) ’Core drill、Tapered end mills、CVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden Finger’PCD V-Cutter’PCD Wood tools’PCD Cutting tools’PCD Circular Saw Blade’PVDD End Mills’diamond tool. INDUCTORS FOR PCD . POWDER FORMING MACHINE ‘Single Crystal Diamond ‘Metric end mills、Miniature end mills、Специальные режущие инструменты ‘Пустотелое сверло ‘Pilot reamer、Fraises’Fresas con mango’ PCD (Polycrystalline diamond) ‘Frese’POWDER FORMING MACHINE’Electronics cutter、Step drill、Metal cutting saw、Double margin drill、Gun barrel、Angle milling cutter、Carbide burrs、Carbide tipped cutter、Chamfering tool、IC card engraving cutter、Side cutter、Staple Cutter’PCD diamond cutter specialized in grooving floors’V-Cut PCD Circular Diamond Tipped Saw Blade with Indexable Insert’ PCD Diamond Tool’ Saw Blade with Indexable Insert’NAS tool、DIN or JIS tool、Special tool、Metal slitting saws、Shell end mills、Side and face milling cutters、Side chip clearance saws、Long end mills’end mill grinder’drill grinder’sharpener、Stub roughing end mills、Dovetail milling cutters、Carbide slot drills、Carbide torus cutters、Angel carbide end mills、Carbide torus cutters、Carbide ball-nosed slot drills、Mould cutter、Tool manufacturer.

Bewise Inc. www.tool-tool.com

よ うこそＢｅｗｉｓｅ　Ｉｎｃ.の 世界へお越し下さいませ、先ず御目出度たいのは新たな

情報を受け取って頂き、もっと各産業に競争力プラス展開。

弊 社は専門なエンド・ミルの製造メーカーで、客先に色んな分野のニーズ、

豊富な パリエーションを満足させ、特にハイテク品質要求にサポート致します。

弊社は各領域に供給できる内容は：

（１）精密ＨＳＳエンド・ミルのＲ＆Ｄ

（２）Carbide Cutting tools設計

（３）鎢鋼エンド・ミル設計

（４）航空エンド・ミル設計

（５）超高硬度エンド・ミル

（６）ダイヤモンド・エンド・ミ ル

（７）医療用品エン ド・ミル設計

（８）自動車部品＆材料加工向けエンド・ミル設計

弊社の製品の供給調達機能は：

（１）生活産業～ハイテク工業までのエンド・ミル設計

（２）ミクロ・エ ンド・ミル～大型エンド・ミル供給

（３）小Ｌｏｔ生産～大量発注対応供給

（４）オートメーション整備調達

（５）スポット対応～流れ生産対応

弊社の 全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。

Bewise Inc. talaşlı imalat sanayinde en fazla kullanılan ve üç eksende (x,y,z) talaş kaldırabilen freze takımlarından olan Parmak Freze imalatçısıdır. Çok geniş ürün yelpazesine sahip olan firmanın başlıca ürünlerini Karbür Parmak Frezeler, Kalıpçı Frezeleri, Kaba Talaş Frezeleri, Konik Alın Frezeler, Köşe Radyüs Frezeler, İki Ağızlı Kısa ve Uzun Küresel Frezeler, İç Bükey Frezeler vb. şeklinde sıralayabiliriz.

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт  www.tool-tool.com  для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web  www.tool-tool.com  for more info.