公告版位

Bewise Inc. www.tool-tool.com Reference source from the internet.

The Latin term in vacuo is used to describe an object as being in what would otherwise be a vacuum. The root of the word vacuum is the Latin adjective vacuus which means "empty," but space can never be perfectly empty. A perfect vacuum with a gaseous pressure of absolute zero is a philosophical concept that is never observed in practice, not least because quantum theory predicts that no volume of space can be perfectly empty in this way. Physicists often use the term "vacuum" slightly differently. They discuss ideal test results that would occur in a perfect vacuum, which they simply call "vacuum" or "free space" in this context, and use the term partial vacuum to refer to the imperfect vacua realized in practice.

The quality of a vacuum is measured in relation to how closely it approaches a perfect vacuum. The residual gas pressure is the primary indicator of quality, and is most commonly measured in units called torr, even in metric contexts. Lower pressures indicate higher quality, although other variables must also be taken into account. Quantum mechanics sets limits on the best possible quality of vacuum. Outer space is a natural high quality vacuum, mostly of much higher quality than what can be created artificially with current technology. Low quality artificial vacuums have been used for suction for millennia.

Vacuum has been a frequent topic of philosophical debate since Ancient Greek times, but was not studied empirically until the 17th century. Evangelista Torricelli produced the first artifical vacuum in 1643, and other experimental techniques were developed as a result of his theories of atmospheric pressure. Vacuum became a valuable industrial tool in the 20th century with the introduction of incandescent light bulbs and vacuum tubes, and a wide array of vacuum technology has since become available. The recent development of human spaceflight has raised interest in the impact of vacuum on human health, and on life forms in general.

A large vacuum chamber


Light bulbs contain a partial vacuum because the tungsten reaches such high temperatures that it would combust any oxygen molecules, usually backfilled with argon, which protects the tungsten filament

Light bulbs contain a partial vacuum because the tungsten reaches such high temperatures that it would combust any oxygen molecules, usually backfilled with argon, which protects the tungsten filament

Vacuum is useful in a variety of processes and devices. Its first common use was in incandescent light bulbs to protect the tungsten filament from chemical degradation. Its chemical inertness is also useful for electron beam welding, chemical vapor deposition and dry etching in the fabrication of semiconductors and optical coatings, cold welding, vacuum packing and vacuum frying. The reduction of convection improves the thermal insulation of thermos bottles and double-paned windows. Deep vacuum promotes outgassing which is used in freeze drying, adhesive preparation, distillation, metallurgy, and process purging. The electrical properties of vacuum make electron microscopes and vacuum tubes possible, including cathode ray tubes. The elimination of air friction is useful for flywheel energy storage and ultracentrifuges.

High to ultra-high vacuum is used in thin film deposition and surface science. High vacuum allows for contamination-free material deposition. Ultra-high vacuum is used in the study of atomically clean substrates, as only a very good vacuum preserves atomic-scale clean surfaces for a reasonably long time (on the order of minutes to days).

Suction is used in a wide variety of applications. The Newcomen steam engine used vacuum instead of pressure to drive a piston. In the 19th century, vacuum was used for traction on Isambard Kingdom Brunel's experimental atmospheric railway.

[édit] Outer space

Artikel utama: Outer space
Outer space is not a perfect vacuum, but a tenuous plasma awash with charged particles, electromagnetic fields, and the occasional star.

Outer space is not a perfect vacuum, but a tenuous plasma awash with charged particles, electromagnetic fields, and the occasional star.

Much of outer space has the density and pressure of an almost perfect vacuum. It has effectively no friction, which allows stars, planets and moons to move freely along ideal gravitational trajectories. But no vacuum is perfect, not even in interstellar space, where there are only a few hydrogen atoms per cubic centimeter at 10 fPa (10−16 Torr). The deep vacuum of space could make it an attractive environment for certain processes, for instance those that require ultraclean surfaces; for small-scale applications, however, it is much more cost-effective to create an equivalent vacuum on Earth than to leave the Earth's gravity well.

Stars, planets and moons keep their atmospheres by gravitational attraction, and as such, atmospheres have no clearly delineated boundary: the density of atmospheric gas simply decreases with distance from the object. In low earth orbit (about 300 km or 185 miles altitude) the atmospheric density is about 100 nPa (10-9 Torr), still sufficient to produce significant drag on satellites. Most artificial satellites operate in this region, and must fire their engines every few days to maintain orbit.

Beyond planetary atmospheres, the pressure of photons and other particles from the sun becomes significant. Spacecraft can be buffeted by solar winds, but planets are too massive to be affected. The idea of using this wind with a solar sail has been proposed for interplanetary travel.

All of the observable universe is filled with large numbers of photons, the so-called cosmic background radiation, and quite likely a correspondingly large number of neutrinos. The current temperature of this radiation is about 3 K, or -270 degrees Celsius or -454 degrees Fahrenheit.

[édit] Effects on humans and animals

Tempo Ogé: Human adaptation to space
This painting, An Experiment on a Bird in the Air Pump by Joseph Wright of Derby, 1768, depicts an experiment performed by Robert Boyle in 1660.

This painting, An Experiment on a Bird in the Air Pump by Joseph Wright of Derby, 1768, depicts an experiment performed by Robert Boyle in 1660.

Vacuum is primarily an asphyxiant. Humans exposed to vacuum will lose consciousness after a few seconds and die within minutes, but the symptoms are not nearly as graphic as commonly shown in pop culture. Robert Boyle was the first to show that vacuum is lethal to small animals. Blood and other body fluids do boil (the medical term for this condition is ebullism), and the vapour pressure may bloat the body to twice its normal size and slow circulation, but tissues are elastic and porous enough to prevent rupture. Ebullism is slowed by the pressure containment of blood vessels, so some blood remains liquid.[1][2] Swelling and ebullism can be reduced by containment in a flight suit. Shuttle astronauts wear a fitted elastic garment called the Crew Altitude Protection Suit (CAPS) which prevents ebullism at pressures as low as 15 Torr (2 kPa).[3] However, even if ebullism is prevented, simple evaporation of blood can cause decompression sickness and gas embolisms. Rapid evaporative cooling of the skin will create frost, particularly in the mouth, but this is not a significant hazard.

Animal experiments show that rapid and complete recovery is the norm for exposures of fewer than 90 seconds, while longer full-body exposures are fatal and resuscitation has never been successful.[4] There is only a limited amount of data available from human accidents, but it is consistent with animal data. Limbs may be exposed for much longer if breathing is not impaired. Rapid decompression can be much more dangerous than vacuum exposure itself. If the victim holds his breath during decompression, the delicate internal structures of the lungs can be ruptured, causing death. Eardrums may be ruptured by rapid decompression, soft tissues may bruise and seep blood, and the stress of shock will accelerate oxygen consumption leading to asphyxiation.[5]

In 1942, in one of a series of experiments on human subjects for the Luftwaffe, the Nazi regime tortured Dachau concentration camp prisoners by exposing them to vacuum in order to determine the human body's capacity to survive high-altitude conditions.

Some extremophile microrganisms, such as Tardigrades, can survive vacuum for a period of years.

[édit] Historical interpretation

Historically, there has been much dispute over whether such a thing as a vacuum can exist. Ancient Greek philosophers did not like to admit the existence of a vacuum, asking themselves "how can 'nothing' be something?". Plato found the idea of a vacuum inconceivable. He believed that all physical things were instantiations of an abstract Platonic ideal, and he could not conceive of an "ideal" form of a vacuum. Similarly, Aristotle considered the creation of a vacuum impossible — nothing could not be something. Later Greek philosophers thought that a vacuum could exist outside the cosmos, but not within it.

The philosopher Al-Farabi (850 - 970 CE) appears to have carried out the first recorded experiments concerning the existence of vacuum, in which he investigated handheld plungers in water.[6] He concluded that air's volume can expand to fill available space, and he suggested that the concept of perfect vacuum was incoherent.[7]

Torricelli's mercury barometer produced the first sustained vacuum in a laboratory.

Torricelli's mercury barometer produced the first sustained vacuum in a laboratory.

In the Middle Ages, the catholic church held the idea of a vacuum to be immoral or even heretical. The absence of anything implied the absence of God, and harkened back to the void prior to the creation story in the book of Genesis. Medieval thought experiments into the idea of a vacuum considered whether a vacuum was present, if only for an instant, between two flat plates when they were rapidly separated. There was much discussion of whether the air moved in quickly enough as the plates were separated, or, as Walter Burley postulated, whether a 'celestial agent' prevented the vacuum arising — that is, whether nature abhorred a vacuum. This speculation was shut down by the 1277 Paris condemnations of Bishop Etienne Tempier, which required there to be no restrictions on the powers of God, which led to the conclusion that God could create a vacuum if he so wished.[8]

The Crookes tube, used to discover and study cathode rays, was an evolution of the Geissler tube.

The Crookes tube, used to discover and study cathode rays, was an evolution of the Geissler tube.

Opposition to the idea of a vacuum existing in nature continued into the Scientific Revolution, with scholars such as Paolo Casati taking an anti-vacuist position. Building upon work by Galileo, Evangelista Torricelli argued in 1643 that there was a vacuum at the top of a mercury barometer. Some people believe that, although Torricelli produced the first sustained vacuum in a laboratory, it was Blaise Pascal who recognized it for what it was. In 1654, Otto von Guericke invented the first vacuum pump and conducted his famous Magdeburg hemispheres experiment, showing that teams of horses could not separate two hemispheres from which the air had been evacuated. Robert Boyle improved Guericke's design and conducted experiments on the properties of vacuum. Robert Hooke also helped Boyle produce an air pump which helped to produce the vacuum. The study of vacuum then lapsed until 1855, when Heinrich Geissler invented the mercury displacement pump and achieved a record vacuum of about 10 Pa (0.1 Torr). A number of electrical properties become observable at this vacuum level, and this renewed interest in vacuum. This, in turn, led to the development of the vacuum tube.

In the 17th century, theories of the nature of light relied upon the existence of an aethereal medium which would be the medium to convey waves of light (Newton relied on this idea to explain refraction and radiated heat). This evolved into the luminiferous aether of the 19th century, but the idea was known to have significant shortcomings - specifically that if the Earth were moving through a material medium, the medium would have to be both extremely tenuous (because the Earth is not detectably slowed in its orbit), and extremely rigid (because vibrations propagate so rapidly).

While outer space has been likened to a vacuum, early physicists postulated that an invisible luminiferous aether existed as a medium to carry light waves, or an "ether which fills the interstellar space".[9] An 1891 article by William Crookes noted: "the [freeing of] occluded gases into the vacuum of space".[10] Even up until 1912, astronomer Henry Pickering commented: "While the interstellar absorbing medium may be simply the ether, [it] is characteristic of a gas, and free gaseous molecules are certainly there".[11]

In 1887, the Michelson-Morley experiment, using an interferometer to attempt to detect the change in the speed of light caused by the Earth moving with respect to the aether, was a famous null result, showing that there really was no static, pervasive medium throughout space and through which the Earth moved as though through a wind. While there is therefore no aether, and no such entity is required for the propagation of light, space between the stars is not completely empty. Besides the various particles which comprise cosmic radiation, there is a cosmic background of photonic radiation (light), including the thermal background at about 2.7 K, seen as a relic of the Big Bang. None of these findings affect the outcome of the Michelson-Morley experiment to any significant degree.

Einstein argued that physical objects are not located in space, but rather have a spatial extent. Seen this way, the concept of empty space loses its meaning.[12] Rather, space is an abstraction, based on the relationships between local objects. Nevertheless, the general theory of relativity admits a pervasive gravitational field, which, in Einstein's words[13], may be regarded as an "aether", with properties varying from one location to another. One must take care, though, to not ascribe to it material properties such as velocity and so on.

In 1930, Paul Dirac proposed a model of vacuum as an infinite sea of particles possessing negative energy, called the Dirac sea. This theory helped refine the predictions of his earlier formulated Dirac equation, and successfully predicted the existence of the positron, discovered two years later in 1932. Despite this early success, the idea was soon abandoned in favour of the more elegant quantum field theory.

The development of quantum mechanics has complicated the modern interpretation of vacuum by requiring indeterminacy. Niels Bohr and Werner Heisenberg's uncertainty principle and Copenhagen interpretation, formulated in 1927, predict a fundamental uncertainty in the instantaneous measurability of the position and momentum of any particle, and which, not unlike the gravitational field, questions the emptiness of space between particles. In the late 20th century, this principle was understood to also predict a fundamental uncertainty in the number of particles in a region of space, leading to predictions of virtual particles arising spontaneously out of the void. In other words, there is a lower bound on the vacuum, dictated by the lowest possible energy state of the quantized fields in any region of space. Ironically, Plato was right, if only by chance.

[édit] Quantum-mechanical definition

Citakan:Detail In quantum mechanics, the vacuum is defined as the state (i.e. solution to the equations of the theory) with the lowest energy. To first approximation, this is simply a state with no particles, hence the name.

Even an ideal vacuum, thought of as the complete absence of anything, will not in practice remain empty. Consider a vacuum chamber that has been completely evacuated, so that the (classical) particle concentration is zero. The walls of the chamber will emit light in the form of black body radiation. This light carries momentum, so the vacuum does have a radiation pressure. This limitation applies even to the vacuum of interstellar space. Even if a region of space contains no particles, the Cosmic Microwave Background fills the entire universe with black body radiation.

An ideal vacuum cannot exist even inside of a molecule. Each atom in the molecule exists as a probability function of space, which has a certain non-zero value everywhere in a given volume. Thus, even "between" the atoms there is a certain probability of finding a particle, so the space cannot be said to be a vacuum.

More fundamentally, quantum mechanics predicts that vacuum energy will be different from its naive, classical value. The quantum correction to the energy is called the zero-point energy and consists of energies of virtual particles that have a brief existence. This is called vacuum fluctuation. Vacuum fluctuations may also be related to the so-called cosmological constant in cosmology. The best evidence for vacuum fluctuations is the Casimir effect and the Lamb shift.[8]

In quantum field theory and string theory, the term "vacuum" is used to represent the ground state in the Hilbert space, that is, the state with the lowest possible energy. In free (non-interacting) quantum field theories, this state is analogous to the ground state of a quantum harmonic oscillator. If the theory is obtained by quantization of a classical theory, each stationary point of the energy in the configuration space gives rise to a single vacuum. String theory is believed to have a huge number of vacua - the so-called string theory landscape.

[édit] Pumping

The manual water pump draws water up from a well by creating a vacuum that water rushes in to fill. In a sense, it acts to evacuate the well, although the high leakage rate of dirt prevents a high quality vacuum from being maintained for any length of time.

The manual water pump draws water up from a well by creating a vacuum that water rushes in to fill. In a sense, it acts to evacuate the well, although the high leakage rate of dirt prevents a high quality vacuum from being maintained for any length of time.
Artikel utama: Vacuum pump

Fluids cannot be pulled, so it is technically impossible to create a vacuum by suction. Suction is the movement of fluids into a vacuum under the effect of a higher external pressure, but the vacuum has to be created first. The easiest way to create an artificial vacuum is to expand the volume of a container. For example, the diaphragm muscle expands the chest cavity, which causes the volume of the lungs to increase. This expansion reduces the pressure and creates a partial vacuum, which is soon filled by air pushed in by atmospheric pressure.

To continue evacuating a chamber indefinitely without requiring infinite growth, a compartment of the vacuum can be repeatedly closed off, exhausted, and expanded again. This is the principle behind positive displacement pumps, like the manual water pump for example. Inside the pump, a mechanism expands a small sealed cavity to create a deep vacuum. Because of the pressure differential, some fluid from the chamber (or the well, in our example) is pushed into the pump's small cavity. The pump's cavity is then sealed from the chamber, opened to the atmosphere, and squeezed back to a minute size.

A cutaway view of a turbomolecular pump, a momentum transfer pump used to achieve high vacuum

A cutaway view of a turbomolecular pump, a momentum transfer pump used to achieve high vacuum

The above explanation is merely a simple introduction to vacuum pumping, and is not representative of the entire range of pumps in use. Many variations of the positive displacement pump have been developed, and many other pump designs rely on fundamentally different principles. Momentum transfer pumps, which bear some similarities to dynamic pumps used at higher pressures, can achieve much higher quality vacuums than positive displacement pumps. Entrapment pumps can capture gases in a solid or absorbed state, often with no moving parts, no seals and no vibration. None of these pumps are universal; each type has important performance limitations. They all share a difficulty in pumping low molecular weight gases, especially hydrogen, helium, and neon.

The lowest pressure that can be attained in a system is also dependent on many things other than the nature of the pumps. Multiple pumps may be connected in series, called stages, to achieve higher vacuums. The choice of seals, chamber geometry, materials, and pump-down procedures will all have an impact. Collectively, these are called vacuum technique. And sometimes, the final pressure is not the only relevant characteristic. Pumping systems differ in oil contamination, vibration, preferential pumping of certain gases, pump-down speeds, intermittent duty cycle, reliability, or tolerance to high leakage rates.

In ultra high vacuum systems, some very odd leakage paths and outgassing sources must be considered. The water absorption of aluminium and palladium becomes an unacceptable source of outgassing, and even the adsorptivity of hard metals such as stainless steel or titanium must be considered. Some oils and greases will boil off in extreme vacuums. The porosity of the metallic chamber walls may have to be considered, and the grain direction of the metallic flanges should be parallel to the flange face.

The lowest pressures currently achievable in laboratory are about 10-13 Torr.[14]

[édit] Outgassing

Artikel utama: Outgassing

Evaporation and sublimation into a vacuum is called outgassing. All materials, solid or liquid, have a small vapour pressure, and their outgassing becomes important when the vacuum pressure falls below this vapour pressure. In man-made systems, outgassing has the same effect as a leak and can limit the achievable vacuum. Outgassing products may condense on nearby colder surfaces, which can be troublesome if they obscure optical instruments or react with other materials. This is of great concern to space missions, where an obscured telescope or solar cell can ruin an expensive mission.

The most prevalent outgassing product in man-made vacuum systems is water absorbed

beeway 發表在 痞客邦 留言(0) 人氣()

Bewise Inc. www.tool-tool.com Reference source from the internet.

Један од значајних приказа особости вакуума приказао је 1654. Ото вон Герике са Магдебуршким коњима, који нису могли раставити металну вакуумску куглу.

Један од значајних приказа особости вакуума приказао је 1654. Ото вон Герике са Магдебуршким коњима, који нису могли раставити металну вакуумску куглу.

Вакуум је простор без материје. Сама реч „вакуум“ је латинског порекла (од латинског vacuus (празан)). Притисак у вакууму је много нижи од атмосферског притиска, и у идеалном случају тежи притиску од нула паскала. Највиши (најдубљи) вакуум се налази у космосу (10 − 14 Pa).

Његова индустријска примена започиње у XX веку, увођењем електричне сијалице и вакуумске цеви.

Вакуум се може произвести тако што се из неког затвореног простора помоћу тзв. вакуум-пумпе извуче сав гас.

Особине вакуума и његова примена: [уреди]

Кроз вакуум се простиру светлост, честице, чврста тела, електрично и магнетно поље, али не и звук — за простирање звука потребна је материја. Топлота се кроз вакуум простире зрачењем (електромагнетни таласи из инфрацрвеног дела спектра), али не и провођењем. Провођење топлоте се одвија преко материјалних носилаца те је у простору ниског притиска знатно слабије, отуда примена вакуума у термосима.

У сијалици влада делимични вакуум, са траговима аргона уместо ваздуха да би се очувало волфрамско влакно.

У сијалици влада делимични вакуум, са траговима аргона уместо ваздуха да би се очувало волфрамско влакно.

Вакуум се користи у бројним процесима и уређајима. Прва уобичајена примена је била у сијалицама са влакном да се заштити волфрамово влакно од хемијске деградације. Хемијска инертност вакуума се такође користи за заваривање електронским млазом, за набацивање танких слојева испаравањем, за суво нагризање у производњи полупроводника, за набацивање оптичких слојева, вакуумско паковање итд. Смањење конвекције (мешања) побољшава топлотну изолацију термос-боца. Високи вакуум потпомаже дегазирање што се користи за сушење замрзавањем и вакуумску дестилацију. Особина вакуума да пропушта електроне без расејавања довела је до примене у електронском микроскопу, вакуумским цевима (први радио) и катодним цевима (први телевизори). Уклањање трења у ваздуху стварањем вакуума корити се у конструкцији ултрацентрифуга и депоновање енергије у замајцима.


Свемирски простор [уреди]


Свемирски вакуум је заправо врло слаба плазма коју чине наелетрисане честице, електромагнетна поља, а понекад и звезда.

Свемирски вакуум је заправо врло слаба плазма коју чине наелетрисане честице, електромагнетна поља, а понекад и звезда.

Највећи део свемира има густину и притисак скоро савршеног вакуума. У свемирском простору практично нема трења због чега се звезде, планете и остала небеска тела крећу слободно по идеалним гравитационим путањама. Међутим, савршеног вакуума нема, чак ни у међузвезданом простору где се нађе неколико водоникових атома по кубном сантиметру правећи притисак од 10 fPa (10−16 Torr). Високи вакуум свемира могао би да представља погодну средину за извесне процесе, на пример оне који захтевају савршено чисте површине, али за уобичајене примене много је лакше створити еквивалентни вакуум на Земљи него савладати Земљину гравитацију.

Звезде, планете и њихови сателити одржавају своју атмосферу гравитационим привлачењем па атмосфере немају јасну границу. Густина атмосферског гаса једноставно опада са растојањем од објекта барометарска формула. У ниској земљиној орбити (висине око 300 km) густина атмосфере је око 100 nPa, (10-9 Torr,) што је још увек довољно да дође до кочења сателита услед трења са средином. Већина вештачких сателита налази се у том региону и да би се одржали у орбити сваких неколико дана морају да активирају своје моторе.

Ван планетарних атмосфера, притисак фотона и других честица са Сунца постаје значајан. Свемирски бродови могу бити „гурани“ сунчевим ветром, међутим, за то планете су превише масивне. Постоје идеје о међупланетарној пловидби, помоћу сунчевог једра, са погоном на сунчев ветар.

Видљиви свемир испуњен је и огромним бројем фотона из космичког позадинског зрачења и сасвим могуће, исто тако великим бројем неутрина. Темепратура простора је око 3 K, или -270 C.

Док је космички простор увек био довођен у везу са вакуумом ранији физичари су подржавали идеју о постојању невидљивог етра, преносиоца светлости, који испуњава међузвездани простор.[1] С друге стране Вилијам Крукс (енгл. William Crookes) је 1891. године забележио: „ослобађање оклудованих гасова у вакуум космичког простора“[2]. Чак и до 1912. године, астроном Вилијам Хенри Пикеринг (енгл. William Henry Pickering) је коментарисао:


歡迎來到Bewise Inc.的世界,首先恭喜您來到這接受新的資訊讓產業更有競爭力,我們是提供專業刀具製造商,應對客戶高品質的刀具需求,我們可以協助客戶滿足您對產業的不同要求,我們有能力達到非常卓越的客戶需求品質,這是現有相關技術無法比擬的,我們成功的滿足了各行各業的要求,包括:精密HSS DIN切削刀具協助客戶設計刀具流程DIN or JIS 鎢鋼切削刀具設計NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計超高硬度的切削刀具醫療配件刀具設計汽車業刀具設計電子產業鑽石刀具木工產業鑽石刀具等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計;從微細刀具到大型刀具;從小型生產到大型量產;全自動整合;我們的技術可提供您連續生產的效能,我們整體的服務及卓越的技術,恭迎您親自體驗!!

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting toolaerospace tool .HSS DIN Cutting toolCarbide end millsCarbide cutting toolNAS Cutting toolNAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end milldisc milling cutter,Aerospace cutting toolhss drillФрезерыCarbide drillHigh speed steelMilling cutterCVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) Core drillTapered end millsCVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden FingerPCD V-CutterPCD Wood toolsPCD Cutting toolsPCD Circular Saw BladePVDD End Millsdiamond tool Single Crystal Diamond Metric end millsMiniature end millsСпециальные режущие инструменты Пустотелое сверло Pilot reamerFraisesFresas con mango PCD (Polycrystalline diamond) ‘FreseElectronics cutterStep drillMetal cutting sawDouble margin drillGun barrelAngle milling cutterCarbide burrsCarbide tipped cutterChamfering toolIC card engraving cutterSide cutterNAS toolDIN or JIS toolSpecial toolMetal slitting sawsShell end millsSide and face milling cuttersSide chip clearance sawsLong end millsStub roughing end millsDovetail milling cuttersCarbide slot drillsCarbide torus cuttersAngel carbide end millsCarbide torus cuttersCarbide ball-nosed slot drillsMould cutterTool manufacturer.

Bewise Inc. www.tool-tool.com

ようこそBewise Inc.の世界へお越し下さいませ、先ず御目出度たいのは新たな

情報を受け取って頂き、もっと各産業に競争力プラス展開。

弊社は専門なエンドミルの製造メーカーで、客先に色んな分野のニーズ

豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。

弊社は各領域に供給できる内容は:

(1)精密HSSエンドミルのR&D

(2)Carbide Cutting tools設計

(3)鎢鋼エンドミル設計

(4)航空エンドミル設計

(5)超高硬度エンドミル

(6)ダイヤモンドエンドミル

(7)医療用品エンドミル設計

(8)自動車部品&材料加工向けエンドミル設計

弊社の製品の供給調達機能は:

(1)生活産業~ハイテク工業までのエンドミル設計

(2)ミクロエンドミル~大型エンドミル供給

(3)小Lot生産~大量発注対応供給

(4)オートメーション整備調達

(5)スポット対応~流れ生産対応

弊社の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.

beeway 發表在 痞客邦 留言(0) 人氣()

Bewise Inc. www.tool-tool.com Reference source from the internet.

利用涂敷或压嵌在研具上的磨料颗粒,通过研具与工件在一定压力下的相对运动对加工表面进行的精整加工(如切削加工)。研磨可用于加工各种金属非金属材料,加工的表面形状有平面,内、外圆柱面和圆锥面,凸、凹球面,螺纹,齿面及其他型面。加工精度可达IT5~01,表面粗糙度可达Ra0.63~0.01微米。
  研磨方法一般可分为湿研、干研和半干研 3类。①湿研:又称敷砂研磨,把液态研磨剂连续加注或涂敷在研磨表面,磨料在工件与研具间不断滑动和滚动,形成切削运动。湿研一般用于粗研磨,所用微粉磨料粒度粗于W7。②干研:又称嵌砂研磨,把磨料均匀在压嵌在研具表面层中,研磨时只须在研具表面涂以少量的硬脂酸混合脂等辅助材料。干研常用于精研磨,所用微粉磨料粒度细于W7。③半干研:类似湿研,所用研磨剂是糊状研磨膏。研磨既可用手工操作,也可在研磨机上进行。工件在研磨前须先用其他加工方法获得较高的预加工精度,所留研磨余量一般为5~30微米。
  研具是使工件研磨成形的工具,同时又是研磨剂的载体,硬度应低于工件的硬度,又有一定的耐磨性,常用灰铸铁制成。湿研研具的金相组织铁素体为主;干研研具则以均匀细小的珠光体基体。研磨M5以下的螺纹和形状复杂的小型工件时,常用软钢研具。研磨小孔和软金属材料时,大多采用黄铜紫铜研具。研具应有足够的刚度,其工作表面要有较高的几何精度。研具在研磨过程中也受到切削和磨损,如操作得当,它的精度也可得到提高,使工件的加工精度能高于研具的原始精度。
   正确处理研磨的运动轨迹是提高研磨质量的重要条件。在平面研磨中,一般要求:①工件相对研具的运动,要尽量保证工件上各点的研磨行程长度相近;②工件运 动轨迹均匀地遍及整个研具表面,以利于研具均匀磨损;③运动轨迹的曲率变化要小,以保证工件运动平稳;④工件上任一点的运动轨迹尽量避免过早出现周期性重 复。图为常用的平面研磨运动轨迹。为了减少切削热,研磨一般在低压低速条件下进行。粗研的压力不超过 0.3兆帕,精研压力一般采用0.03~0.05兆帕。粗研速度一般为20~120米/分,精研速度一般取10~30米/分。

歡迎來到Bewise Inc.的世界,首先恭喜您來到這接受新的資訊讓產業更有競爭力,我們是提供專業刀具製造商,應對客戶高品質的刀具需求,我們可以協助客戶滿足您對產業的不同要求,我們有能力達到非常卓越的客戶需求品質,這是現有相關技術無法比擬的,我們成功的滿足了各行各業的要求,包括:精密HSS DIN切削刀具協助客戶設計刀具流程DIN or JIS 鎢鋼切削刀具設計NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計超高硬度的切削刀具醫療配件刀具設計汽車業刀具設計電子產業鑽石刀具木工產業鑽石刀具等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計;從微細刀具到大型刀具;從小型生產到大型量產;全自動整合;我們的技術可提供您連續生產的效能,我們整體的服務及卓越的技術,恭迎您親自體驗!!

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting toolaerospace tool .HSS DIN Cutting toolCarbide end millsCarbide cutting toolNAS Cutting toolNAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end milldisc milling cutter,Aerospace cutting toolhss drillФрезерыCarbide drillHigh speed steelMilling cutterCVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) Core drillTapered end millsCVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden FingerPCD V-CutterPCD Wood toolsPCD Cutting toolsPCD Circular Saw BladePVDD End Millsdiamond tool Single Crystal Diamond Metric end millsMiniature end millsСпециальные режущие инструменты Пустотелое сверло Pilot reamerFraisesFresas con mango PCD (Polycrystalline diamond) ‘FreseElectronics cutterStep drillMetal cutting sawDouble margin drillGun barrelAngle milling cutterCarbide burrsCarbide tipped cutterChamfering toolIC card engraving cutterSide cutterNAS toolDIN or JIS toolSpecial toolMetal slitting sawsShell end millsSide and face milling cuttersSide chip clearance sawsLong end millsStub roughing end millsDovetail milling cuttersCarbide slot drillsCarbide torus cuttersAngel carbide end millsCarbide torus cuttersCarbide ball-nosed slot drillsMould cutterTool manufacturer.

Bewise Inc. www.tool-tool.com

ようこそBewise Inc.の世界へお越し下さいませ、先ず御目出度たいのは新たな

情報を受け取って頂き、もっと各産業に競争力プラス展開。

弊社は専門なエンドミルの製造メーカーで、客先に色んな分野のニーズ

豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。

弊社は各領域に供給できる内容は:

(1)精密HSSエンドミルのR&D

(2)Carbide Cutting tools設計

(3)鎢鋼エンドミル設計

(4)航空エンドミル設計

(5)超高硬度エンドミル

(6)ダイヤモンドエンドミル

(7)医療用品エンドミル設計

(8)自動車部品&材料加工向けエンドミル設計

弊社の製品の供給調達機能は:

(1)生活産業~ハイテク工業までのエンドミル設計

(2)ミクロエンドミル~大型エンドミル供給

(3)小Lot生産~大量発注対応供給

(4)オートメーション整備調達

(5)スポット対応~流れ生産対応

弊社の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.

beeway 發表在 痞客邦 留言(0) 人氣()

Bewise Inc. www.tool-tool.com Reference source from the internet.

Mill シリーズ Level 3 : 複合面加工
2軸から5軸加工、高速切削 をサポート。
Mastercamの真髄がここに凝縮!!
( Level 1,2 の機能をすべて含みます。)2次元、3次元を思いのまま、精密な加工分野に特に威力を発揮。
また、複雑で高度な多軸加工、高速切削にも威力を発揮。3次元CADのMastercam Design の完全装備より、
作製した図面データからNCデータツールパスを容易に生成し、 
設計、加工者の思いのまま、スムーズに効率よく行えます。
        
ポケット、輪郭、ドリル、2次元切削機能

単純な形状から複雑な形状まで、幅広い加工が可能な2次元、2.5次元切削機能。
時間を最大限に有効活用できる豊富なツールを装備。

●テーパ壁の輪郭切削機能と輪郭再切削機能。
●ジグザグ、一方向、円弧渦巻き、一定間隔渦巻き、モーフィング渦巻きなどのポケット加工。
●それぞれの切削深さでらせん、ジグザグ進入が選択できるポケット加工。
●らせん動作は円弧または直線で出力。
●渦巻きでのポケット切削時に工具が鋭角コーナーを切削する際、削り残しを防ぐコーナー除去切削とピッチ一定切削。
●開いたポケット形状も、図形要素を作成せずに切削することが可能。
●前回実行した切削で削り残った部分だけを小さな工具で自動的に仕上げる再切削機能。
●ワンクリックで、複数のドリル点や輪郭、ポケット領域を定義することが可能。
●ポケット加工時に、外側輪郭の壁と島の壁に別々のテーパ角度を定義することが可能。
●島やパーツの天面を切削し、美しく仕上げるフェース加工。
●輪郭、ポケットツールパスの仕上げ切削では、リードインとリードアウトを別々に定義できる。
●輪郭加工では、荒取りパスと仕上げパスの回数や、切削深さの設定が可能。
●ポケットツールパスは、それぞれのZ深さを加工する際に、工具を退避せずに次の深さへ移動させたり、各Z深さで仕上げ切削を行うといった選択が可能。
●複数のポケット加工を行う場合、すべてのポケットを荒取りした後に仕上げを行うか、ひとつのポケットを荒取りした後に、直ちに仕上げをおこなうか、といった選択ができる。
●パラメトリックスプラインや、NURBSスプラインなどの2次元、3次元輪郭切削機能。
●工具の進入、退出方法を完全に制御可能。
●工具動作を最小限に抑えるためのドリル工程の最適化機能。

●ポケット、輪郭、ドリル加工          ●自動サークルミル                  ●自動ポケット再切削

 

3次元 荒取り加工
迅速かつ高精度の切削を実現させるためには、クオリティーの高いNCプログラムが必要。
Mastercamを使用すれば、豊富な切削技術による高精度の荒取りツールパスを生成することができます。
●複数のサーフェスやソリッド、そして、サーフェスとソリッドが混合したモデルの荒取り切削。
●Zピッチ一定での等高線荒取り機能、ポケット荒取り機能。
●完璧なZ補正機能を使用すれば、駆け下りていくように切削する平行、放射状ツールパスの作成。
●2次元のツールパスをサーフェス上に投影し、荒取りツールパスを生成。
●素材の上方から垂直に工具を切り込ませて荒取りを行うブランジ切削機能。
●等高線ツールパスの削り残し機能により、前回の切削で削り残した部分のみを認識し、ツールパスを生成。
●限界深さを設定することにより、Zピッチ一定では切削しきれない深さでツールパスを生成。
  
●荒取り平行切削                  ●様々な進入方法を伴うポケット加工       ●荒取りブランジ切削
3次元 仕上げ加工
豊富に揃えられた仕上げツールパス機能により、
あらゆる仕事に最良の切削方法を適用することができます。

●複数のサーフェスやソリッド、そして、サーフェスとソリッドが混合したモデルの仕上げ切削。
●変化に富んだ切削工程にも、力強いツールパスを生成する平行切削機能。
●スキャロップ一定ツールパス : 勾配がついている部分でも、平ら部分と同様に一定の切削ピッチを保ちながらツールパスを生成。
●放射状ツールパス : 選択されたポイントから、外側に放射していくようにしてツールパスを生成。
●面沿いツールパス : 単一、あるいは複数のサーフェスの形状にそってツールパスを生成し、自然で美しい仕上がりを実現
●ルールドツールパス : 図形要素、分岐点、節点による自動シンクロ機能や、Z一定、ジグザグ、サーキュラー、一方向、5軸スワーフなどの切削方法の選択が可能
●投影ツールパス : 複数のサーフェス上に2次元ツールパスを投影し、仕上げ切削をを行う。
削り残し切削
切削後の削り残しが多い場合、余計な手作業と時間を費やすことになります。
Mastercamには、自動削り残し機能が装備されており、高効率のツールパスを生成することができます。

●等高線ツールパスの削り残し機能により、前回の切削で削り残した部分のみを認識し、ツールパスを生成。
●ペンシルツールパス : 工具が届きにくい部分を仕上げるために、サーフェスが交差する部分で工具を走らせる
●設定された角度の勾配がついている領域のみを切削することができる急斜面、緩斜面、切削
多軸加工
多軸加工を使用することにより、切削操作は新たなる柔軟性を獲得します。
Mastercamの豊富な多軸加工機能は、迅速かつ高効率のプログラミングを実現します。
●複合面のフロアでのスワーフ5軸切削。
●工具ベクトルフィルタにより、ガウジ回避のために、ベクトルの追加、除去ができます。
●工具進入よりも大きな内部領域を切削する5軸シャンク抑制。

●単一サーフェイスの5軸面沿い加工。

●サーフェスへの自動曲線投影を含む、5軸でのサーフェス上の曲線切削は、工具の側面角度、リード/ラグ角度も定義可能。
●5軸ドリルの実行。
●真空形状のパーツをトリムするといった事に対応するために、モデルのサーフェスエッジのまわりに5軸輪郭ツールパスを生成。
●5軸から4軸への変換。
 
●ロールダイ切削                      ●5軸シャンク抑制


歡迎來到Bewise Inc.的世界,首先恭喜您來到這接受新的資訊讓產業更有競爭力,我們是提供專業刀具製造商,應對客戶高品質的刀具需求,我們可以協助客戶滿足您對產業的不同要求,我們有能力達到非常卓越的客戶需求品質,這是現有相關技術無法比擬的,我們成功的滿足了各行各業的要求,包括:精密HSS DIN切削刀具協助客戶設計刀具流程DIN or JIS 鎢鋼切削刀具設計NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計超高硬度的切削刀具醫療配件刀具設計汽車業刀具設計電子產業鑽石刀具木工產業鑽石刀具等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計;從微細刀具到大型刀具;從小型生產到大型量產;全自動整合;我們的技術可提供您連續生產的效能,我們整體的服務及卓越的技術,恭迎您親自體驗!!

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting toolaerospace tool .HSS DIN Cutting toolCarbide end millsCarbide cutting toolNAS Cutting toolNAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end milldisc milling cutter,Aerospace cutting toolhss drillФрезерыCarbide drillHigh speed steelMilling cutterCVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) Core drillTapered end millsCVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden FingerPCD V-CutterPCD Wood toolsPCD Cutting toolsPCD Circular Saw BladePVDD End Millsdiamond tool Single Crystal Diamond Metric end millsMiniature end millsСпециальные режущие инструменты Пустотелое сверло Pilot reamerFraisesFresas con mango PCD (Polycrystalline diamond) ‘FreseElectronics cutterStep drillMetal cutting sawDouble margin drillGun barrelAngle milling cutterCarbide burrsCarbide tipped cutterChamfering toolIC card engraving cutterSide cutterNAS toolDIN or JIS toolSpecial toolMetal slitting sawsShell end millsSide and face milling cuttersSide chip clearance sawsLong end millsStub roughing end millsDovetail milling cuttersCarbide slot drillsCarbide torus cuttersAngel carbide end millsCarbide torus cuttersCarbide ball-nosed slot drillsMould cutterTool manufacturer.

Bewise Inc. www.tool-tool.com

ようこそBewise Inc.の世界へお越し下さいませ、先ず御目出度たいのは新たな

情報を受け取って頂き、もっと各産業に競争力プラス展開。

弊社は専門なエンドミルの製造メーカーで、客先に色んな分野のニーズ

豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。

弊社は各領域に供給できる内容は:

(1)精密HSSエンドミルのR&D

(2)Carbide Cutting tools設計

(3)鎢鋼エンドミル設計

(4)航空エンドミル設計

(5)超高硬度エンドミル

(6)ダイヤモンドエンドミル

(7)医療用品エンドミル設計

(8)自動車部品&材料加工向けエンドミル設計

弊社の製品の供給調達機能は:

(1)生活産業~ハイテク工業までのエンドミル設計

(2)ミクロエンドミル~大型エンドミル供給

(3)小Lot生産~大量発注対応供給

(4)オートメーション整備調達

(5)スポット対応~流れ生産対応

弊社の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.

beeway 發表在 痞客邦 留言(0) 人氣()

Bewise Inc. www.tool-tool.com Reference source from the internet.

20 世紀備受推崇的全球投資先驅約翰‧坦伯頓爵士 (John Marks Templeton)於2008年7月8日辭世,享壽95 歲。坦伯頓在1954年提出全球化投資的觀念,並成立第 1檔全球股票基金-坦伯頓成長基金,更進一步推廣到 全世界,他的10大投資心法已成為經典。
坦伯頓10大投資心法如下:


1. 投資要看「實質」報酬率(Invest for total real returns):進行長期投資計劃時,應該要著眼於 「實質報酬率」,因為將投資利得扣除「通貨膨脹」與 「稅賦」後才是真正的報酬率,如果投資人忽略通貨膨 脹與稅賦的影響,長期投資的路途將會步履維艱。


2.投資策略應隨時保持彈性(Keep an open and flexible mind):投資人應該隨時保持開闊且充滿彈性 的心胸,勇於吸收各種投資新知,而非獨鍾單一金融資 產。


3. 千萬不要追隨群眾,懂得逆勢操作(Never follow the crowd):如果你買的證券跟別人相同,績 效會跟別人一樣;除非你跟大多數人不同,否則不可能 創造優異績效。要在別人失望賣出時買進,在別人貪婪 時賣出,需要最大的毅力,但可以得到最大的報酬。


4.世事多變化(Everything Changes):空頭市場總 是相當短暫,多頭市場也一樣。股價通常會在景氣循環 走到谷底前1個月到前1年上漲,會在景氣循環走到最高 峰前1個月到前1年反轉下跌;如果一種產業或一種證券 類型受投資人歡迎,受歡迎的時間總是相當短暫,失去 投資人的歡心後,可能很多年內都不會翻身。


5.避免流行 (Avoid the popular):當任何選股方 法變得流行後,投資人要轉換至較不流行的選股方法。


6. 從自己的錯誤中學習(Learn from your mistakes):「這次不一樣」是歷史上代價最高的一句 話。有些人認為「避免犯下投資錯誤唯一的方法,就是 永遠不再投資!」其實,這種悲觀的想法才是最大的錯 誤!投資人不妨從錯誤中吸取教訓,成為未來投資理財 致勝的重要關鍵。


7.在市場悲觀時買進(Buy during times of pessimism):多頭市場總是在悲觀中誕生,在懷疑中成 長,在樂觀中成熟,在陶醉中死亡;最悲觀時是最好的 買進時機,最樂觀時是最好的賣出時機。
8.全球化投資(Search Worldwide):避免將所有的 雞蛋放在同一個籃子裡,最好的方式就是全球化投資, 不僅可以尋找更多更佳的獲利機會,也可以分散投資單 一市場的波動風險。


9. 價值投資慎選個股(Hunt for bargains among quality stocks):投資應該以個股的價值為考量,而 非市場前景或經濟趨勢。因為個股的表現將決定大盤的 漲跌幅,而非大盤的走勢決定個股的價格,縱使空頭市 場也仍有逆勢上揚的個股。選擇價值被市場低估的股票 長期投資,靜待市場回升至合理價值,才能讓我們賺取 超額的利潤。


10.無 人知曉天下事(No one knows everything): 在當前這種金融商品推陳出新、資訊爆炸的時代,沒有 人能夠掌握所有的理財資訊,也沒有人能夠永遠精準判 斷市場前景。我們應該以謙沖的態度不斷學習新知,並 且多方徵詢專家意見,而非聽信單一名嘴或分析師的建 言,因為成功的投資人總是不斷為新的問題尋找新的答 案。


約翰.坦伯頓 1912年11月29日出生在美國田納西州 溫契斯特小鎮,靠著自力更生和獎學金,1934年以優異 的成績畢業於美國耶魯大學,並獲得羅德獎學金前往英 國留學,1936年從英國牛津大學巴里歐學院(Balliol College)畢業,取得法律碩士學位,隨即回美國進入華 爾街工作,開始他近一甲子的投資生涯。


在投資及生活領域,坦伯頓深信絕對不要追隨群眾 ,而應逆勢操作(Don't follow the crowd)的理念,他 獨具慧眼的前瞻視野,以及嚴謹的研究精神,將其終生 成就臻至巔峰。


當 市場仍侷限於美國華爾街投資時,坦伯頓在1954 年提出全球化投資的觀念,並成立第 1檔全球股票基金 -坦伯頓成長基金,並將全球化投資可網羅更多投資機 會、分散風險的視野,推廣至全世界。1999年美國《錢 雜誌》(Money Magazine)尊稱坦伯頓為「20世紀最偉大 的操盤手」(the greatest global stock picker of the century)。


1987年,坦伯頓成立坦伯頓基金會,獎助研究宗教 與科學融合、人格發展及自由等多元研究及教育性質的 活動,並被英國女王伊莉莎白二世授予爵士的封號。


1992年,坦伯頓將創設的坦伯頓投資公司售予富蘭 克林公司,共組富蘭克林坦伯頓基金集團,此後,坦伯 頓自投資管理界退休,畢其心力於慈善事業。


富蘭克林坦伯頓基金集團表示,雖然1996年之後, 坦伯頓並未參與富蘭克林坦伯頓基金集團任何的營運, 但坦伯頓堅守長期投資與價值投資的理念,早已深深影 響並引導著富蘭克林坦伯頓共同基金集團。


歡迎來到Bewise Inc.的世界,首先恭喜您來到這接受新的資訊讓產業更有競爭力,我們是提供專業刀具製造商,應對客戶高品質的刀具需求,我們可以協助客戶滿足您對產業的不同要求,我們有能力達到非常卓越的客戶需求品質,這是現有相關技術無法比擬的,我們成功的滿足了各行各業的要求,包括:精密HSS DIN切削刀具協助客戶設計刀具流程DIN or JIS 鎢鋼切削刀具設計NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計超高硬度的切削刀具醫療配件刀具設計汽車業刀具設計電子產業鑽石刀具木工產業鑽石刀具等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計;從微細刀具到大型刀具;從小型生產到大型量產;全自動整合;我們的技術可提供您連續生產的效能,我們整體的服務及卓越的技術,恭迎您親自體驗!!

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting toolaerospace tool .HSS DIN Cutting toolCarbide end millsCarbide cutting toolNAS Cutting toolNAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end milldisc milling cutter,Aerospace cutting toolhss drillФрезерыCarbide drillHigh speed steelMilling cutterCVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) Core drillTapered end millsCVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden FingerPCD V-CutterPCD Wood toolsPCD Cutting toolsPCD Circular Saw BladePVDD End Millsdiamond tool Single Crystal Diamond Metric end millsMiniature end millsСпециальные режущие инструменты Пустотелое сверло Pilot reamerFraisesFresas con mango PCD (Polycrystalline diamond) ‘FreseElectronics cutterStep drillMetal cutting sawDouble margin drillGun barrelAngle milling cutterCarbide burrsCarbide tipped cutterChamfering toolIC card engraving cutterSide cutterNAS toolDIN or JIS toolSpecial toolMetal slitting sawsShell end millsSide and face milling cuttersSide chip clearance sawsLong end millsStub roughing end millsDovetail milling cuttersCarbide slot drillsCarbide torus cuttersAngel carbide end millsCarbide torus cuttersCarbide ball-nosed slot drillsMould cutterTool manufacturer.

Bewise Inc. www.tool-tool.com

ようこそBewise Inc.の世界へお越し下さいませ、先ず御目出度たいのは新たな

情報を受け取って頂き、もっと各産業に競争力プラス展開。

弊社は専門なエンドミルの製造メーカーで、客先に色んな分野のニーズ

豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。

弊社は各領域に供給できる内容は:

(1)精密HSSエンドミルのR&D

(2)Carbide Cutting tools設計

(3)鎢鋼エンドミル設計

(4)航空エンドミル設計

(5)超高硬度エンドミル

(6)ダイヤモンドエンドミル

(7)医療用品エンドミル設計

(8)自動車部品&材料加工向けエンドミル設計

弊社の製品の供給調達機能は:

(1)生活産業~ハイテク工業までのエンドミル設計

(2)ミクロエンドミル~大型エンドミル供給

(3)小Lot生産~大量発注対応供給

(4)オートメーション整備調達

(5)スポット対応~流れ生産対応

弊社の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.

beeway 發表在 痞客邦 留言(0) 人氣()

Bewise Inc. www.tool-tool.com Reference source from the internet.

Vákuum (latinsko vacuus - prazen, prost) je prazen prostor, prostor brez molekul, atomov ali podatomskih delcev. Popoln vakuum je težko doseči. Zato rečemo vakuum tudi kadar imamo tlak dosti manjši od zračnega. V medplanetarnem prostoru je boljši vakuum od najboljšega umetnega. Vendar niti tam ni popoln. Še vedno vsebuje nekaj delcev na cm³.

Zamisel o vakuumu izvira že iz antične Grčije. Prvi ga je ustvaril Evangelista Torricelli. Otto von Guericke je leta 1650 iznašel vakuumsko črpalko. Z njim sta se ukvarjala tudi Ernest Rutherford in Niels Bohr. Sodobna fizika preučuje fluktuacije v vakuumu. Vakuum se uporablja v elektronkah.

Steklena bučka žarnice vsebuje delni vakuum, po navadi z dodanim argonom, ki varuje volframovo žičko

Steklena bučka žarnice vsebuje delni vakuum, po navadi z dodanim argonom, ki varuje volframovo žičko

Sodobna fizika pa poskuša tudi dokazati, da vakuum ni nikoli prazen prostor, ki ne vsebuje »ničesar«. Nekateri fiziki (Hall Puthof) menijo, da v vakuumu vedno nekaj niha (vibrira), se premika, valovi. Te fluktuacije niso biološke in kemične reakcije, kot v atomskem (snovnem) svetu, ampak so nekakšne zvočne vibracije, ki ustvarjajo energijo. Vedno več raziskovanj je v tej smeri, saj ti fiziki menijo, da se v tem skriva »brezplačna energija« (free energy) in se nahaja povsod okrog nas, nas obdaja. Takšna energija bi popolnoma nadomestila fosilna goriva. V Nasi so to energijo (zero point energy field) že proizvedli, vendar še niso naredili naprave, ki bi to energijo omejil in jo nadzorovano proizvajal.[navedi vir]


歡迎來到Bewise Inc.的世界,首先恭喜您來到這接受新的資訊讓產業更有競爭力,我們是提供專業刀具製造商,應對客戶高品質的刀具需求,我們可以協助客戶滿足您對產業的不同要求,我們有能力達到非常卓越的客戶需求品質,這是現有相關技術無法比擬的,我們成功的滿足了各行各業的要求,包括:精密HSS DIN切削刀具協助客戶設計刀具流程DIN or JIS 鎢鋼切削刀具設計NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計超高硬度的切削刀具醫療配件刀具設計汽車業刀具設計電子產業鑽石刀具木工產業鑽石刀具等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計;從微細刀具到大型刀具;從小型生產到大型量產;全自動整合;我們的技術可提供您連續生產的效能,我們整體的服務及卓越的技術,恭迎您親自體驗!!

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting toolaerospace tool .HSS DIN Cutting toolCarbide end millsCarbide cutting toolNAS Cutting toolNAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end milldisc milling cutter,Aerospace cutting toolhss drillФрезерыCarbide drillHigh speed steelMilling cutterCVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) Core drillTapered end millsCVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden FingerPCD V-CutterPCD Wood toolsPCD Cutting toolsPCD Circular Saw BladePVDD End Millsdiamond tool Single Crystal Diamond Metric end millsMiniature end millsСпециальные режущие инструменты Пустотелое сверло Pilot reamerFraisesFresas con mango PCD (Polycrystalline diamond) ‘FreseElectronics cutterStep drillMetal cutting sawDouble margin drillGun barrelAngle milling cutterCarbide burrsCarbide tipped cutterChamfering toolIC card engraving cutterSide cutterNAS toolDIN or JIS toolSpecial toolMetal slitting sawsShell end millsSide and face milling cuttersSide chip clearance sawsLong end millsStub roughing end millsDovetail milling cuttersCarbide slot drillsCarbide torus cuttersAngel carbide end millsCarbide torus cuttersCarbide ball-nosed slot drillsMould cutterTool manufacturer.

Bewise Inc. www.tool-tool.com

ようこそBewise Inc.の世界へお越し下さいませ、先ず御目出度たいのは新たな

情報を受け取って頂き、もっと各産業に競争力プラス展開。

弊社は専門なエンドミルの製造メーカーで、客先に色んな分野のニーズ

豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。

弊社は各領域に供給できる内容は:

(1)精密HSSエンドミルのR&D

(2)Carbide Cutting tools設計

(3)鎢鋼エンドミル設計

(4)航空エンドミル設計

(5)超高硬度エンドミル

(6)ダイヤモンドエンドミル

(7)医療用品エンドミル設計

(8)自動車部品&材料加工向けエンドミル設計

弊社の製品の供給調達機能は:

(1)生活産業~ハイテク工業までのエンドミル設計

(2)ミクロエンドミル~大型エンドミル供給

(3)小Lot生産~大量発注対応供給

(4)オートメーション整備調達

(5)スポット対応~流れ生産対応

弊社の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.

beeway 發表在 痞客邦 留言(0) 人氣()



Cash用寬螢幕的PC已經好幾年了,
但科技真的進步很快,
寬螢幕成為主流真是必然的事實,
只希望台灣的某些混蛋快讓電視訊號數位化,
快讓台灣人也有像美日韓一樣的高畫質數位化電視吧!

現在關於寬螢幕的規格非常混亂、而且魚龍混雜。
普通寬螢幕的定義在LCD上為16:10而在電視上則為16:9。
雖然現在iPhone也推出了 2.35:1的"寬螢幕"但是還是與真正意義上的寬螢幕有所區別的。
預計到2010年的顯示器市場,
16:9的LCD將達到總量的90%而寬螢幕液晶電視 也將達到67%。
Acer走在了向寬螢幕產品轉換的前列。
從圖中我們也可以看到Acer的 P224W。
新技術總是驅動著廠商去追求最大的效益,
不管未來的發展如何,總是會對消費者有利的。

[引用來源]

歡迎進入Beeway的憶想世界以記憶體為基調 結合創新科技、設計美學、健康概念、工業藝術、與時尚流行等元素, 賦予隨身碟更豐富多元的面貌.

Beeway專門設計製造USB隨身碟飾品,最新產品為高品質的鈦鍺USB隨身碟項鍊組

Mail:nochingyo@beeway.com.tw 網址www.beeway.com.tw

TEL:886 4 24759277 FAX:886 4 24714839

We manufacture and design USB Flash Drive Disk / Memory Stick with accessory by combining advanced tech, stylish esthetics, health concept, craft, and fashion. Creativity is our best power.

beeway 發表在 痞客邦 留言(0) 人氣()