Bewise Inc. www.tool-tool.com Reference source from the internet.
Warsaw Report
Medical-related finishing holding up In A Tough Economy
By Jim Destefani, Editor
Electropolishing is an electrochemical process that is almost the opposite of plating. While plating deposits metal on a surface, electropolishing smoothes and polishes the surfaces of metal parts by the controlled removal of microscopic amounts of material.
Frequently used for components that must have a very smooth and lustrous finish, such as surgical instruments, the process is most often applied to stainless steels, especially the commonly used 300- and 400-series materials. It can be controlled to remove metal within ±0.0001 inch and— depending on process time, temperature, current, bath composition and part surface condition before processing—can produce a range of finishes from satin to mirror bright.
None of this is news to Earl Kline, president of Warsaw Electropolishing (Warsaw, IN). Kline has worked in the finishing industry for more than 36 years, first at a plating shop and then in his own business since 1992.
“Having worked at a plating shop for 23 years before starting my own company, I was familiar with the ‘feast or famine’ aspect of the business,” Kline says. “And that’s what we see here. There are very few times that things are just going along at an ideal pace.”
The Medical Market
One thing that helps mitigate the ups and downs of the
metal finishing business for Warsaw Electropolishing is its location in the hub
of orthopedic implant technology. The small northern Indiana town is home to
companies that control the vast majority of the market for artificial hips,
knees and other orthopedic devices. While not entirely immune from the current
downturn, Warsaw Electropolishing’s medical-related business is still relatively
steady compared with other industry segments the company serves, according to
Kline.
“About 60% of our business is medical-related,” he says. “We do work directly for some of the big implant companies. We also do work for suppliers who make parts for them.”
Process Offerings
As the company name implies, Warsaw Electropolishing has
found its niche in non-plated electrochemical surface treatments for stainless
steels and titanium alloys. “We do strictly electropolishing and passivating,”
Kline says. “The electropolishing part of the business is only for stainless
steels. We also passivate some titanium and stainless using nitric and citric
acid passivation.”
Most of the medical components the company processes are surgical tools and toolholders. “We electropolish drill bits, rasps and other tools that have contact with the bone during surgery,” Kline explains.
Being a family-owned shop—son Duane is the company’s production manager—Warsaw Electropolishing’s jobs tend toward relatively low-volume specialty work as opposed to high-volume jobs. “Lot sizes vary quite a bit, but the average job is probably in the 100–125 piece range,” Kline says.
According to Kline, his company’s medical customers are looking for a couple of benefits from electropolishing. “The parts we process are either to size or for appearance,” he says. “Sometimes the customer has an oversize part and wants the part taken down to a certain size. That’s pretty straightforward. You just have to make sure you don’t take the parts out of spec.
“The other main thing is appearance,” he continues. “Surface finish is not such a big deal for many jobs, although sometimes it is important.
“It’s often called out on the blueprint, but sometimes the requirement doesn’t really correspond to any function of the part. So we talk with customers about what they really expect in terms of surface finish.”
Part surface finish after electropolishing also depends on the condition of parts when they come in, Kline says. “If the surface finish of as-received parts is around 20 μin Ra, electropolishing should improve it. But if it’s more like 1 or 2 μin Ra, electropolishing may actually increase it.
“The bottom line is, there just aren’t a lot of written specifications for electropolishing. So we talk with customers to see what they’re really expecting from our process.” When surface finish is important, Warsaw Electropolishing uses an optical comparator to visually check parts, he adds.
According to Kline, the passivation part of his company’s business is a bit more clear cut, at least in terms of specifications. “There are all kinds of specs for passivating,” he says. “We run jobs to various general industrial specs—AES, ASTM and AMS-QQ-P—and to customer specifications, which are usually pretty explicit about what they’resteps need to be followed.
The company’s titanium passivation experience consists of processing commercially pure titanium and a couple of aluminum-vanadium alloys most commonly associated with aerospace applications. But nearly all the titanium parts are for medical applications, Kline says.
The EP Process
The electropolishing portion of Warsaw Electropolishing’s
work consists mainly of processing 300- and 400-series stainless materials and
cobalt-chrome alloys. Kline says the specific alloy being electropolished makes
a difference in processing and handling. “The 300-series stainless steels are
relatively forgiving, while some of the 400-series materials are very sensitive
to, for example, being left in the tank with no current applied,” he says. “Some
sensitive materials, you can’t even keep them in the rinse water too long.”
Warsaw Electropolishing generates a routing sheet detailing all needed process steps and processing conditions for every job. “The first time a job comes in, especially if there’s a visual aspect to it, we develop a process to make sure the customer gets what they want,” Kline says. “When the job comes in again, we can pull up the router and follow the procedure through the shop.”
Being precision components bound for use in operating rooms around the world, practically every medical part at Warsaw Electropolishing is subjected to an aqueous ultrasonic cleaning process and spray rinsing. Depending on the material, some parts are also dried before heading to the electropolishing tanks.
“After electropolishing we rinse, and some parts require immersion in nitric acid or another solution after electropolishing,” Kline explains. “If parts need passivation we do that, then check the components to specifications before packing and shipping.”
Temperature in the electropolishing tank is 145°F, and parts remain in the tank for a few seconds to a few minutes depending on size and specifications. The company mixes its own proprietary blend of electropolishing chemicals. “By doing that ourselves, we know exactly what’s in it, and we’ve had pretty good success with that approach,” Kline explains.
For racking, the company usually buys rack components and assembles them in-house. “Occasionally we have a special rack made, but practically all our jobs can be run using a ready-made rack or a rack made with components we purchase,” Kline says.
Some of the jobs in the shop on this day include a vibratory bowl for part handling and orientation, surgical drill bits less than ¼ inch in diameter and stainless steel exhaust pipes for marine engines.
“We run quite a few of the bowls, and some of them are 18–24 inches in diameter,” Kline says. “That’s another segment of our business that’s going pretty well right now—vibratory bowls for pharmaceutical or food processing equipment.
Drill bits are produced from Type 316 stainless steel. “For the drill bits, the flutes and other parts of the drill need to be nice and clean,” he continues. “Electropolishing is really a good way to clean parts.”
Warsaw Electropolishing also processes several sizes and configurations of the exhaust pipes, which are first electropolished and then passivated.
Quality and Environmental Control
Warsaw Electropolishing is in the midst
of preparing for ISO 9001 registration, so the company is busy documenting its
processes and procedures. For electropolishing process control, workers monitor
bath temperature and concentration on a regular basis—a least daily—and make
required additions on a regular schedule.
Shop workers also wear plastic gloves when handling parts to avoid fingerprinting. “If customers are visiting, they can handle their own parts without gloves, but even then we’ve sometimes told them to stop,” Kline says. “We just don’t want a fingerprint to be part of a problem, and if there are fingerprints on a part they’re not ours.”
After processing, parts are inspected visually and using standard calipers and micrometers to verify dimensions. “We try not to make inspection more complicated than it needs to be,” Kline says. “We generally work to tolerances in the thousandths, but some jobs require tolerances within a couple ten-thousandths.”
Some customers visit the shop to perform quality audits and others send in a third-party auditor, Kline explains. “And, every medical job requires a certification that tells them exactly what we did and how we did it,” he adds. “Our customers keep those on file so that when they’re audited for ISO or by one of their customers, they have that documentation.”
On the environmental front, the company discharges no wastewater. “With multiple counterflowed rinses, we keep water use to a minimum,” Kline says. “The final rinse is deionized water, and since it’s counterflowed all the other rinse water comes from that. Eventually we neutralize and evaporate the water, and what’s left is hauled away a couple times a year."
歡迎來到Bewise Inc.的世界，首先恭喜您來到這接受新的資訊讓產業更有競爭力，我們是提供專業刀具製造商，應對客戶高品質的刀具需求，我們可以協助客戶滿足您對產業的不同要求，我們有能力達到非常卓越的客戶需求品質，這是現有相關技術無法比擬的，我們成功的滿足了各行各業的要求，包括：精密HSS DIN切削刀具、協助客戶設計刀具流程、DIN or JIS 鎢鋼切削刀具設計、NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計、超高硬度的切削刀具、醫療配件刀具設計、複合式再研磨機、PCD地板專用企口鑽石組合刀具、粉末造粒成型機、主機版專用頂級電桿、PCD V-Cut刀、捨棄式圓鋸片組、粉末成型機、主機版專用頂級電感、’汽車業刀具設計、電子產業鑽石刀具、木工工業用圓鋸片、木工產業鑽石刀具、銑刀與切斷複合再研磨機、銑刀與鑽頭複合再研磨機、銑刀與螺絲攻複合再研磨機等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計；從微細刀具到大型刀具；從小型生產到大型量產；全自動整合；我們的技術可提供您連續生產的效能，我們整體的服務及卓越的技術，恭迎您親自體驗！！
BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan
Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users’ demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting tool、aerospace tool .HSS DIN Cutting tool、Carbide end mills、Carbide cutting tool、NAS Cutting tool、NAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end mill、disc milling cutter,Aerospace cutting tool、hss drill’Фрезеры’Carbide drill、High speed steel、Compound Sharpener’Milling cutter、INDUCTORS FOR PCD’CVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) ’Core drill、Tapered end mills、CVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden Finger’PCD V-Cutter’PCD Wood tools’PCD Cutting tools’PCD Circular Saw Blade’PVDD End Mills’diamond tool. INDUCTORS FOR PCD . POWDER FORMING MACHINE ‘Single Crystal Diamond ‘Metric end mills、Miniature end mills、Специальные режущие инструменты ‘Пустотелое сверло ‘Pilot reamer、Fraises’Fresas con mango’ PCD (Polycrystalline diamond) ‘Frese’POWDER FORMING MACHINE’Electronics cutter、Step drill、Metal cutting saw、Double margin drill、Gun barrel、Angle milling cutter、Carbide burrs、Carbide tipped cutter、Chamfering tool、IC card engraving cutter、Side cutter、Staple Cutter’PCD diamond cutter specialized in grooving floors’V-Cut PCD Circular Diamond Tipped Saw Blade with Indexable Insert’ PCD Diamond Tool’ Saw Blade with Indexable Insert’NAS tool、DIN or JIS tool、Special tool、Metal slitting saws、Shell end mills、Side and face milling cutters、Side chip clearance saws、Long end mills’end mill grinder’drill grinder’sharpener、Stub roughing end mills、Dovetail milling cutters、Carbide slot drills、Carbide torus cutters、Angel carbide end mills、Carbide torus cutters、Carbide ball-nosed slot drills、Mould cutter、Tool manufacturer.
ようこそＢｅｗｉｓｅ Ｉｎｃ.の世界へお越し下さいませ、先ず御目出度たいのは新たな
情報を受け取って頂き、もっと各産業に競争力プラス展開。
弊社は専門なエンド・ミルの製造メーカーで、客先に色んな分野のニーズ、
豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。
弊社は各領域に供給できる内容は：
（３）鎢鋼エンド・ミル設計
（４）航空エンド・ミル設計
（５）超高硬度エンド・ミル
（７）医療用品エンド・ミル設計
弊社の製品の供給調達機能は：
（４）オートメーション整備調達
弊社の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。
Bewise Inc. talaşlı imalat sanayinde en fazla kullanılan ve üç eksende (x,y,z) talaş kaldırabilen freze takımlarından olan Parmak Freze imalatçısıdır. Çok geniş ürün yelpazesine sahip olan firmanın başlıca ürünlerini Karbür Parmak Frezeler, Kalıpçı Frezeleri, Kaba Talaş Frezeleri, Konik Alın Frezeler, Köşe Radyüs Frezeler, İki Ağızlı Kısa ve Uzun Küresel Frezeler, İç Bükey Frezeler vb. şeklinde sıralayabiliriz.
BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт www.tool-tool.com для получения большей информации.
BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web www.tool-tool.com for more info.
留言列表
