- This article is about Japanese Industrial Standards in general; see JIS encoding for the character encoding used in representing the Japanese language for computer software and communication.
Japanese Industrial Standards (JIS) specifies the standards used for industrial activities in Japan. The standardization process is coordinated by Japanese Industrial Standards Committee and published through Japanese Standards Association.
[edit] History
In the Meiji era, private enterprises were responsible for making standards. However, the Japanese government did have standards and specification documents for procurement purposes for certain articles, such as munitions.
These were summarized to form an official standard (old JES) in 1921. During World War II, simplified standards were established to increase matériel output.
The present Japanese Standards Association was established after Japan's defeat in World War II in 1945. The Japanese Industrial Standards Committee regulations were promulgated in 1946, Japanese standards (new JES) was formed.
The Industrial Standardization Law was enacted in 1949, which forms the the legal foundation for the present Japanese Industrial Standards (JIS).
The Industrial Standardization Law was revised in 2004 and the "JIS mark" (product certification system) was changed, and the new JIS mark was applied since October 1, 2005 upon re-certification. The old mark is allowed to be used until September 30, 2008, for a transition period of 3 years, and every manufacture obtaining new or renewing certification under the authority's approval are then able to use the new JIS mark. Therefore all JIS certified Japanese products shall have the new JIS mark after October 1, 2008.
[edit] Standards classification and numbering
Standards are named like "JIS X 0208:1997", where X denotes area division, followed by four digits (or five digits for some of the standards corresponding ISO standards), and the revision release year. Divisions of JIS and significant standards are:
- A - Civil Engineering and Architecture
- B - Mechanical Engineering
- JIS B 7021-1989 : Classification and Water Resistibility of Water Resistant Watches for General Use
- JIS B 7512-1993 : Steel tape measures
- JIS B 7516-1987 : Metal Rules
- C - Electronic and Electrical Engineering
- JIS C 0920:2003 : Degrees of protection provided by enclosures (IP Code)
- D - Automotive Engineering
- E - Railway Engineering
- F - Shipbuilding
- G - Ferrous Materials and Metallurgy
- H - Nonferrous materials and metallurgy[1]
- H2105 - Pig lead
- H2107 - Zinc ingots
- H2113 - Cadmium metal
- H2116 - Tungsten powder and tungsten carbide powder
- H2118 - Aluminum alloy ingots for die castings
- H2121 - Electrolytic cathode copper
- H2141 - Silver bullion
- H2201 - Zinc alloy ingots for die casting
- H2202 - Copper alloy ingots for castings
- H2211 - Aluminium alloy ingots for castings
- H2501 - Phosphor copper metal
- H3100 - Copper and copper alloy sheets, plates and strips
- H3110 - Phosphor bronze and nickel silver sheets, plates and strips
- H3130 - Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and nickel silver sheets, plates and strips for springs
- H3140 - Copper bus bars
- H3250 - Copper and copper alloy rods and bars
- H3260 - Copper and copper alloy wires
- H3270 - Copper beryllium alloy, phosphor bronze and nickel silver rods, bars and wires
- H3300 - Copper and copper alloy seamless pipes and tubes
- H3320 - Copper and copper alloy welded pipes and tubes
- H3330 - Plastic covered copper tubes
- H3401 - Pipe fittings of copper and copper alloys
- H4000 - Aluminium and aluminium alloy sheets and plates, strips and coiled sheets
- H4001 - Painted aluminium and aluminium alloy sheets and strips
- H4040 - Aluminium and aluminium alloy rods, bars and wires
- H4080 - Aluminium and aluminium alloys extruded tubes and cold-drawn tubes
- H4090 - Aluminium and aluminium alloy welded pipes and tubes
- H4100 - Aluminium and aluminium alloy extruded shape
- H4160 - Aluminium and aluminium alloy foils
- H4170 - High purity aluminium foils
- H4301 - Lead and lead alloy sheets and plates
- H4303 - DM lead sheets and plates
- H4311 - Lead and lead alloy tubes for common industries
- H4461 - Tungsten wires for lighting and electronic equipments
- H4463 - Thoriated tungsten wires and rods for lighting and electronic equipment
- H4631 - Titanium and titanium alloy tubes for heat exchangers
- H4635 - Titanium and titanium alloy welded pipes
- H5401 - White metal
- H8300 - Thermal spraying―zinc, aluminium and their alloys
- H8601 - Anodic oxide coatings on aluminium and aluminium alloys
- H8602 - Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys
- H8615 - Electroplated coatings of chromium for engineering purposes
- H8641 - Zinc hot dip galvanizings
- H8642 - Hot dip aluminized coatings on ferrous products
- K - Chemical Engineering
- L - Textile Engineering
- M - Mining
- P - Pulp and Paper
- Q - Management System
- R - Ceramics
- S - Domestic Wares
- T - Medical Equipment and Safety Appliances
- W - Aircraft and Aviation
- X - Information Processing
- JIS X 0201:1997 : Japanese national variant of ISO 646
- JIS X 0202:1998 : Japanese national standard which corresponds to ISO 2022
- JIS X 0208:1997 : 7-bit and 8-bit double byte coded KANJI sets for information interchange
- JIS X 0212:1990 : Code of the supplementary Japanese graphic character set for information interchange
- JIS X 0213:2004 : 7-bit and 8-bit double byte coded extended Kanji sets for information interchange
- JIS X 0221-1:2001 : Japanese national standard which corresponds to ISO 10646
- JIS X 0401:1973 : To-do-fu-ken (prefecture) identification code
- JIS X 0402:2003 : Identification code for cities, towns and villages
- JIS X 0405:1994 : Commodity classification code
- JIS X 0408:2004 : Identification code for universities and colleges
- JIS X 0501:1985 : Bar code symbol for uniform commodity code
- JIS X 0510:2004 : QR Code
- JIS X 3001-1:1998, JIS X 3001-2:2002, JIS X 3001-3 : Fortran programming language
- JIS X 3002:1992 : COBOL
- JIS X 3005-1:2002 : SQL
- JIS X 3010:2003 : C programming language
- JIS X 3014:2003 : C++
- JIS X 3030:1994 : POSIX
- JIS X 4061:1996 : Collation of Japanese character string
- JIS X 6002:1980 : Keyboard layout for information processing using the JIS 7 bit coded character set
- JIS X 6054-1:1999 : MIDI
- JIS X 6241:1997 : 120 mm DVD -- Read-only disk
- JIS X 6243:1998 : 120 mm DVD Rewritable Disk (DVD-RAM)
- JIS X 6245:1999 : 80 mm (1.23GB/side) and 120 mm (3.95GB/side) DVD-Recordable-Disk (DVD-R)
- JIS X 9051:1984 : 16-dots matrix character patterns for display devices
- JIS X 9052:1983 : 24-dots matrix character patterns for dot printers
- Z - Miscellaneous
歡迎來到Bewise Inc.的世界，首先恭喜您來到這接受新的資訊讓產業更有競爭力，我們是提供專業刀具製造商，應對客戶高品質的刀具需求，我們可以協助客戶滿足您對產業的不同要求，我們有能力達到非常卓越的客戶需求品質，這是現有相關技術無法比擬的，我們成功的滿足了各行各業的要求，包括：精密HSS DIN切削刀具、協助客戶設計刀具流程、DIN or JIS 鎢鋼切削刀具設計、NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計、超高硬度的切削刀具、BW捨棄式鑽石V卡刀’BW捨棄式金屬圓鋸片、木工捨棄式金屬圓鋸片、PCD木工圓鋸片、醫療配件刀具設計、汽車業刀具設計、電子產業鑽石刀具、全鎢鋼V卡刀-電路版專用’全鎢鋼鋸片、焊刃式側銑刀、焊刃式千鳥側銑刀、焊刃式T型銑刀、焊刃式千鳥T型銑刀、焊刃式螺旋機械鉸刀、全鎢鋼斜邊刀電路版專用、鎢鋼焊刃式高速鉸刀、超微粒鎢鋼機械鉸刀、超微粒鎢鋼定點鑽、焊刃式帶柄角度銑刀、焊刃式螺旋立銑刀、焊刃式帶柄倒角銑刀、焊刃式角度銑刀、焊刃式筒型平面銑刀、木工產業鑽石刀具等等。我們的產品涵蓋了從民生刀具到工業級的刀具設計；從微細刀具到大型刀具；從小型生產到大型量產；全自動整合；我們的技術可提供您連續生產的效能，我們整體的服務及卓越的技術，恭迎您親自體驗！！
BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool..com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan
Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users’ demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting tool、aerospace tool .HSS DIN Cutting tool、Carbide end mills、Carbide cutting tool、NAS Cutting tool、NAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end mill、disc milling cutter,Aerospace cutting tool、hss drill’Фрезеры’Carbide drill、High speed steel、Milling cutter、CVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) ’Core drill、Tapered end mills、CVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden Finger’Edge modifying knife’Solid carbide saw blade-V type’V-type locking-special use for PC board’Metal Slitting Sawa’Carbide Side milling Cutters’Carbide Side Milling Cutters With Staggered Teeth’Carbide T-Slot Milling Cutters’Carbide T-Slot Milling Cutters With Staggered Teeth’Carbide Machine Reamers’High speed reamer-standard type’High speed reamer-long type’’PCD V-Cutter’PCD Wood tools’PCD Cutting tools’PCD Circular Saw Blade’PVDD End Mills’diamond tool ‘V-type locking-special use for PC board ‘Single Crystal Diamond ‘Metric end mills、Miniature end mills、Специальные режущие инструменты ‘Пустотелое сверло ‘Pilot reamer、Fraises’Fresas con mango’ PCD (Polycrystalline diamond) ‘Frese’Electronics cutter、Step drill、Metal cutting saw、Double margin drill、Gun barrel、Angle milling cutter、Carbide burrs、Carbide tipped cutter、Chamfering tool、IC card engraving cutter、Side cutter、NAS tool、DIN or JIS tool、Special tool、Metal slitting saws、Shell end mills、Side and face milling cutters、Side chip clearance saws、Long end mills、Stub roughing end mills、Dovetail milling cutters、Carbide slot drills、Carbide torus cutters、Angel carbide end mills、Carbide torus cutters、Carbide ball-nosed slot drills
留言列表
