BW Professional Cutter Expert www.tool-tool.com

Bewise Inc. www.tool-tool.com Reference source from the internet.

Selenium (pronounced /sɨˈlɛniəm/ si-LEN-ee-əm or /sɨˈliːniəm/ si-LEE-nee-əm) is a chemical element with the atomic number 34, represented by the chemical symbol Se, an atomic mass of 78.96. It is a nonmetal, chemically related to sulfur and tellurium, and rarely occurs in its elemental state in nature.

Isolated selenium occurs in several different forms, the most stable of which is a dense purplish-gray semi-metal (semiconductor) form that is structurally a trigonal polymer chain. It conducts electricity better in the light than in the dark, and is used in photocells (see section Allotropes below). Selenium also exists in many non-conductive forms: a black glass-like allotrope, as well as several red crystalline forms built of eight-membered ring molecules, like its lighter cousin sulfur.

Selenium is found in economic quantities in sulfide ores such as pyrite, partially replacing the sulfur in the ore matrix. Minerals that are selenide or selenate compounds are also known, but are rare. The chief commercial uses for selenium today are in glassmaking and in chemicals and pigments. Uses in electronics, once important, have been supplanted by silicon semiconductor devices.

Selenium salts are toxic in large amounts, but trace amounts of the element are necessary for cellular function in most, if not all, animals, forming the active center of the enzymes glutathione peroxidase and thioredoxin reductase (which indirectly reduce certain oxidized molecules in animals and some plants) and three known deiodinase enzymes (which convert one thyroid hormone to another). Selenium requirements in plants differ by species, with some plants, it seems, requiring none.

Selenium (Greek σελήνη selene meaning "Moon") was discovered in 1817 by Jöns Jakob Berzelius,who found the element associated with tellurium (named for the Earth). It was discovered as a byproduct of sulfuric acid production.

It came to medical notice later because of its toxicity to humans working in industry. It was also recognized as an important veterinary toxin. In 1954, the first hints of specific biological functions of selenium were discovered in microorganisms. Its essentiality for mammalian life was discovered in 1957. In the 1970s, it was shown to be present in two independent sets of enzymes. This was followed by the discovery of selenocysteine in proteins. During the 1980s, it was shown that selenocysteine is encoded by the codon TGA. The recoding mechanism was worked out first in bacteria and then in mammals (see SECIS element).

Growth in selenium consumption was historically driven by steady development of new uses, including applications in rubber compounding, steel alloying, and selenium rectifiers. Selenium is also an essential material in the drums of laser printers and copiers. By 1970, selenium in rectifiers had largely been replaced by silicon, but its use as a photoconductor in plain-paper copiers had become its leading application. During the 1980s, the photoconductor application declined (although it was still a large end-use) as more and more copiers using organic photoconductors were produced. At the current time, the largest use of selenium worldwide is in glass manufacturing, followed by uses in chemicals and pigments. Electronics use, despite a number of continued applications, continues to decline.

In the late 1990s, the use of selenium (usually with bismuth) as an additive to plumbing brasses to meet no-lead environmental standards became important. At present, total world selenium production continues to increase modestly.

Selenium occurs naturally in a number of inorganic forms, including selenide, selenate, and selenite. In soils, selenium most often occurs in soluble forms such as selenate (analogous to sulfate), which are leached into rivers very easily by runoff.

Selenium has a biological role, and it is found in organic compounds such as dimethyl selenide, selenomethionine, selenocysteine, and methylselenocysteine. In these compounds selenium plays a role analogous to that of sulfur.

Selenium is most commonly produced from selenide in many sulfide ores, such as those of copper, silver, or lead. It is obtained as a byproduct of the processing of these ores, from the anode mud of copper refineries and the mud from the lead chambers of sulfuric acid plants. These muds can be processed by a number of means to obtain free selenium.

Natural sources of selenium include certain selenium-rich soils, and selenium that has been bioconcentrated by certain plants. Anthropogenic sources of selenium include coal burning and the mining and smelting of sulfide

Structure of trigonal selenium

Native selenium is a rare mineral, which does not usually form good crystals, but, when it does, they are steep rhombohedrons or tiny acicular (hair-like) crystals.Isolation of selenium is often complicated by the presence of other compounds and elements.

Most elemental selenium comes as a byproduct of refining copper or producing sulfuric acid.

Industrial production of selenium often involves the extraction of selenium dioxide from residues obtained during the purification of copper. Commonly, production begins by oxidation with sodium carbonate to produce selenium dioxide. The selenium dioxide is then mixed with water and the solution is acidified to form selenous acid (oxidation step). Selenous acid is bubbled with sulfur dioxide (reduction step) to give elemental selenium.

Elemental selenium produced in chemical reactions invariably appears as the amorphous red form: an insoluble, brick-red powder. When this form is rapidly melted, it forms the black, vitreous form, which is usually sold industrially as beads. The most thermodynamically stable and densest form of selenium is the electrically conductive gray (trigonal) form, which is composed of long helical chains of selenium atoms (see figure). The conductivity of this form is notably light-sensitive. Selenium also exists in three different deep-red crystalline monoclinic forms, which are composed of Se₈ molecules, similar to many allotropes of sulfur. However, selenium does not exhibit the unusual changes in viscosity that sulfur undergoes when gradually heated.

Selenium has six naturally occurring isotopes, five of which are stable: ⁷⁴Se, ⁷⁶Se, ⁷⁷Se, ⁷⁸Se, and ⁸⁰Se. The last three also occur as fission products, along with ⁷⁹Se, which has a half-life of 295,000 years. The final naturally occurring isotope, ⁸²Se, has a very long half-life (~10²⁰ yr, decaying via double beta decay to ⁸²Kr), which, for practical purposes, can be considered to be stable. Twenty-three other unstable isotopes have been characterized.

See also Selenium-79 for more information on recent changes in the measured half-life of this long-lived fission product, important for the dose calculations performed in the frame of the geological disposal of long-lived radioactive waste.

Although it is toxic in large doses, selenium is an essential micronutrient for animals. In plants, it occurs as a bystander mineral, sometimes in toxic proportions in forage (some plants may accumulate selenium as a defense against being eaten by animals, but other plants such as locoweed require selenium, and their growth indicates the presence of selenium in soil). It is a component of the unusual amino acids selenocysteine and selenomethionine. In humans, selenium is a trace element nutrient that functions as cofactor for reduction of antioxidant enzymes such as glutathione peroxidases and certain forms of thioredoxin reductase found in animals and some plants (this enzyme occurs in all living organisms, but not all forms of it in plants require selenium).

The glutathione peroxidase family of enzymes (GSH-Px) catalyze certain reactions that remove reactive oxygen species such as hydrogen peroxide and organic hydroperoxides:

2 GSH + H₂O₂----GSH-Px → GSSG + 2 H₂O

Selenium also plays a role in the functioning of the thyroid gland and in every cell that utilizes thyroid hormone, by participating as a cofactor for the three known thyroid hormone deiodinases, which activate and then deactivate various thyroid hormones and their metabolites. It may inhibit Hashimotos's disease, in which the body's own thyroid cells are attacked as alien. A reduction of 21% on TPO antibodies was reported with the dietary intake of 0.2 mg of selenium.

Dietary selenium comes from nuts, cereals, meat, fish, and eggs. Brazil nuts are the richest ordinary dietary source (though this is soil-dependent, since the Brazil nut does not require high levels of the element for its own needs). In descending order of concentration, high levels are also found in kidney, tuna, crab, and lobster.

The human body's burden of selenium is believed to be in the 13-20 milligram range.

Although selenium is an essential trace element, it is toxic if taken in excess. Exceeding the Tolerable Upper Intake Level of 400 micrograms per day can lead to selenosis This 400 microgram Tolerable Upper Intake Level is based primarily on a 1986 study of five Chinese patients who exhibited overt signs of selenosis and a follow up study on the same five people in 1992. The 1992 study actually found the maximum safe dietary Se intake to be approximately 800 micrograms per day (15 micrograms per kilogram body weight), but suggested 400 micrograms per day to not only avoid toxicity, but also to avoid creating an imbalance of nutrients in the diet and to account for data from other countries. The Chinese people who suffered from selenium toxicity ingested selenium by eating corn grown in extremely selenium-rich stony coal (carbonaceous shale). This coal was shown to have selenium content as high as 9.1%, the highest concentration in coal ever recorded in literature. A dose of selenium as small as 5 mg per day can be lethal for many humans.

Reference ranges for blood tests, showing selenium in purple in center

Symptoms of selenosis include a garlic odor on the breath, gastrointestinal disorders, hair loss, sloughing of nails, fatigue, irritability, and neurological damage. Extreme cases of selenosis can result in cirrhosis of the liver, pulmonary edema, and death. Elemental selenium and most metallic selenides have relatively low toxicities because of their low bioavailability. By contrast, selenates and selenites are very toxic, having an oxidant mode of action similar to that of arsenic trioxide. The chronic toxic dose of selenite for human beings is about 2400 to 3000 micrograms of selenium per day for a long time. Hydrogen selenide is an extremely toxic, corrosive gas. Selenium also occurs in organic compounds such as dimethyl selenide, selenomethionine, selenocysteine and methylselenocysteine, all of which have high bioavailability and are toxic in large doses. Nano-size selenium has equal efficacy, but much lower toxicity.

On April 19, 2009, twenty-one polo ponies began to die shortly before a match in the United States Polo Open. Three days later, a pharmacy released a statement explaining that the horses had received an incorrect dose of one of the ingredients used in a vitamin compound, with which the horses had been injected. Such vitamin injections are common to promote recovery after a match. The pharmacy did not initially release the name of the specific ingredient due to ongoing law-enforcement and other investigations. Analysis of inorganic compounds of the vitamin supplement indicated that selenium concentrations were ten to fifteen times higher than normal in the horses' blood samples and 15 to 20 times higher than normal in their liver samples. It was later confirmed that selenium was the ingredient in question.

Selenium poisoning of water systems may result whenever new agricultural runoff courses through normally dry undeveloped lands. This process leaches natural soluble selenium compounds (such as selenates) into the water, which may then be concentrated in new "wetlands" as the water evaporates. High selenium levels produced in this fashion have been found to have caused certain congenital disorders in wetland birds.

Selenium deficiency is relatively rare in healthy, well-nourished individuals. It can occur in patients with severely compromised intestinal function, those undergoing total parenteral nutrition, and also on advanced-aged people (over 90). Also, people dependent on food grown from selenium-deficient soil are also at risk. However, although New Zealand has low levels of selenium in its soil, adverse health effects have not been detected.

Selenium deficiency may only occur when a low selenium status is linked with an additional stress such as chemical exposure or increased oxidant stress due to vitamin E deficiency.

There are interactions between selenium and other nutrient such as iodine and vitamin E. The interaction is observed in the etiology of many deficiency diseases in animals and pure selenium deficiency is in fact rare. The effect of selenium deficiency on health remains uncertain, in particular, in relation to Kashin-Beck disease.

Cancer

Several studies have suggested a possible link between cancer and selenium deficiency. One study, known as the NPC, was conducted to test the effect of selenium supplementation on the recurrence of skin cancers on selenium-deficient men. It did not demonstrate a reduced rate of recurrence of skin cancers, but did show a reduced occurrence of total cancers, although without a statistically significant change in overall mortality.The preventative effect observed in the NPC was greatest in those with the lowest baseline selenium levels.In 2009 the 5.5 year SELECT study reported that selenium and vitamin E supplementation, both alone and together, did not significantly reduce the incidence of prostate cancer in 35,000 men who "generally were replete in selenium at baseline". The SELECT trial found that vitamin E did not reduce prostate cancer as it had in the Alpha-Tocopherol, Beta Carotene (ATBC) study, but the ATBC had a large percentage of smokers while the SELECT trial did not.. There was a slight trend toward more prostate cancer in the SELECT trial, but in the vitamin E only arm of the trial, where no selenium was given.

Dietary selenium prevents chemically induced carcinogenesis in many rodent studies. It has been proposed that selenium may help prevent cancer by acting as an antioxidant or by enhancing immune activity. Not all studies agree on the cancer-fighting effects of selenium. One study of naturally occurring levels of selenium in over 60,000 participants did not show a significant correlation between those levels and cancer. The SU.VI.MAX study concluded that low-dose supplementation (with 120 mg of ascorbic acid, 30 mg of vitamin E, 6 mg of beta carotene, 100 µg of selenium, and 20 mg of zinc) resulted in a 30% reduction in the incidence of cancer and a 37% reduction in all-cause mortality in males, but did not get a significant result for females.However, there is evidence that selenium can help chemotherapy treatment by enhancing the efficacy of the treatment, reducing the toxicity of chemotherapeutic drugs, and preventing the body's resistance to the drugs. Studies of cancer cells in vitro showed that chemotherapeutic drugs, such as Taxol and Adriamycin, were more toxic to strains of cancer cells grown in culture when selenium was added.

In March 2009, Vitamin E (400 IU) and selenium (200 micrograms) supplements were reported to affect gene expression and can act as a tumor suppressor. Eric Klein, MD from the Glickman Urological and Kidney Institute in Ohio said the new study “lend credence to the previous evidence that selenium and vitamin E might be active as cancer preventatives”.In an attempt to rationalize the differences between epidemiological and in vitro studies and randomized trials like SELECT, Klein said that randomized controlled trials “do not always validate what we believe biology indicates and that our model systems are imperfect measures of clinical outcomes in the real world”.

HIV/AIDS

Some research has indicated a geographical link between regions of selenium-deficient soils and peak incidences of HIV/AIDS infection. For example, much of sub-Saharan Africa is low in selenium. However, Senegal is not, and also has a significantly lower level of AIDS infection than the rest of the continent. AIDS appears to involve a slow and progressive decline in levels of selenium in the body. Whether this decline in selenium levels is a direct result of the replication of HIV or related more generally to the overall malabsorption of nutrients by AIDS patients remains debated.

Low selenium levels in AIDS patients have been directly correlated with decreased immune cell count and increased disease progression and risk of death. Selenium normally acts as an antioxidant, so low levels of it may increase oxidative stress on the immune system leading to more rapid decline of the immune system. Others have argued that T-cell associated genes encode selenoproteins similar to human glutathione peroxidase. Depleted selenium levels in turn lead to a decline in CD4 helper T-cells, further weakening the immune system.

Regardless of the cause of depleted selenium levels in AIDS patients, studies have shown that selenium deficiency does strongly correlate with the progression of the disease and the risk of death.

Tuberculosis

Some research has suggested that selenium supplementation, along with other nutrients, can help prevent the recurrence of tuberculosis.

Diabetes

A well-controlled study showed that selenium intake is positively correlated with the risk of developing type 2 diabetes. Because high serum selenium levels are positively associated with the prevalence of diabetes, and because selenium deficiency is rare, supplementation is not recommended in well-nourished populations such as the U.S.

Mercury

Experimental findings have demonstrated a protective effect of selenium on methylmercury toxicity, but epidemiological studies have been inconclusive in linking selenium to protection against the adverse effects of methylmercury.

Chemistry

Selenium is a catalyst in many chemical reactions and is widely used in various industrial and laboratory syntheses, especially organoselenium chemistry. It is also widely used in structure determination of proteins and nucleic acids by X-ray crystallography (incorporation of one or more Se atoms helps with MAD and SAD phasing.)

Manufacturing and materials use

The largest use of selenium worldwide is in glass and ceramic manufacturing, where it is used to give a red color to glasses, enamels and glazes as well as to remove color from glass by counteracting the green tint imparted by ferrous impurities.

Selenium is used with bismuth in brasses to replace more toxic lead. It is also used to improve abrasion resistance in vulcanized rubbers.

Electronics

Because of its photovoltaic and photoconductive properties, selenium is used in photocopying, photocells, light meters and solar cells. It was once widely used in rectifiers. These uses have mostly been replaced by silicon-based devices, or are in the process of being replaced. The most notable exception is in power DC surge protection, where the superior energy capabilities of selenium suppressors make them more desirable than metal oxide varistors.

Sheets of amorphous selenium convert x-ray images to patterns of charge in xeroradiography and in solid-state, flat-panel x-ray cameras.

Photography

Selenium is used in the toning of photographic prints, and it is sold as a toner by numerous photographic manufacturers including Kodak and Fotospeed. Its use intensifies and extends the tonal range of black and white photographic images as well as improving the permanence of prints.

Early photographic light meters used selenium but this application is now obsolete.

The substance loosely called selenium sulfide (approximate formula SeS₂) is the active ingredient in some anti-dandruff shampoos.The selenium compound kills the scalp fungus Malassezia, which causes shedding of dry skin fragments. The ingredient is also used in body lotions to treat Tinea versicolor due to infection by a different species of Malassezia fungus.

Nutrition

Selenium is used widely in vitamin preparations and other dietary supplements, in small doses (typically 50 to 200 micrograms per day for adult humans). Some livestock feeds are fortified with selenium as well.

Selenium may be measured in blood, plasma, serum or urine to monitor excessive environmental or occupational exposure, confirm a diagnosis of poisoning in hospitalized victims or to assist in a forensic investigation in a case of fatal overdosage. Some analytical techniques are capable of distinguishing organic from inorganic forms of the element. Both organic and inorganic forms of selenium are largely converted to monosaccharide conjugates (selenosugars) in the body prior to being eliminated in the urine. Cancer patients receiving daily oral doses of selenothionine may achieve very high plasma and urine selenium concentrations.

Main article: Evolution of dietary antioxidants

Over three billion years ago, blue-green algae were the most primitive oxygenic photosynthetic organisms and are ancestors of multicellular eukaryotic algae. Algae that contain the highest amount of antioxidant selenium, iodide, and peroxidase enzymes were the first living cells to produce poisonous oxygen in the atmosphere. It has been suggested that algal cells required a protective antioxidant action, in which selenium and iodides, through peroxidase enzymes, have had this specific role.Selenium, which acts synergistically with iodine, is a primitive mineral antioxidant, greatly present in the sea and prokaryotic cells, where it is an essential component of the family of glutathione peroxidase (GSH-Px) antioxidant enzymes; seaweeds accumulate high quantity of selenium and iodine. In 2008, a study showed that iodide also scavenges reactive oxygen species (ROS) in algae, and that its biological role is that of an inorganic antioxidant, the first to be described in a living system, active also in an in vitro assay with the blood cells of today’s humans."

From about three billion years ago, prokaryotic selenoprotein families drive selenocysteine evolution. Selenium is incorporated into several prokaryotic selenoprotein families in bacteria, archaea and eukaryotes as selenocysteine, where selenoprotein peroxiredoxins protect bacterial and eukaryotic cells against oxidative damage. Selenoprotein families of GSH-Px and the deiodinases of eukaryotic cells seem to have a bacterial phylogenetic origin. The selenocysteine-containing form occurs in species as diverse as green algae, diatoms, sea urchin, fish and chicken. Selenium enzymes are involved in utilization of the small reducing molecules glutathione and thioredoxin. One family of selenium-containing molecules (the glutathione peroxidases) destroy peroxide and repair damaged peroxidized cell membranes, using glutathione. Another selenium-containing enzyme in some plants and in animals (thioredoxin reductase) generates reduced thioredoxin, a dithiol that serves as an electron source for peroxidases and also the important reducing enzyme ribonucleotide reductase that makes DNA presursors from RNA precursors.

At about 500 Mya, plants and animals began to transfer from the sea to rivers and land, the environmental deficiency of marine mineral antioxidants (as selenium, iodine, etc.) was a challenge to the evolution of terrestrial life. Trace elements involved in GSH-Px and superoxide dismutase enzymes activities, i.e. selenium, vanadium, magnesium, copper, and zinc, may have been lacking in some terrestrial mineral-deficient areas.Marine organisms retained and sometimes expanded their seleno-proteomes, whereas the seleno-proteomes of some terrestrial organisms were reduced or completely lost. These findings suggest that, with the exception of vertebrates, aquatic life supports selenium utilization, whereas terrestrial habitats lead to reduced use of this trace element Marine fishes and vertebrate thyroid glands have the highest concentration of selenium and iodine. From about 500 Mya, freshwater and terrestrial plants slowly optimized the production of “new” endogenous antioxidants such as ascorbic acid (Vitamin C), polyphenols (including flavonoids), tocopherols, etc. A few of these appeared more recently, in the last 50–200 million years, in fruits and flowers of angiosperm plants. In fact, the angiosperms (the dominant type of plant today) and most of their antioxidant pigments evolved during the late Jurassic period.

The deiodinase isoenzymes constitute another family of eukaryotic selenoproteins with identified enzyme function. Deiodinases are able to extract electrons from iodides, and iodides from iodothyronines. They are, thus, involved in thyroid-hormone regulation, participating in the protection of thyrocytes from damage by H₂O₂ produced for thyroid-hormone biosynthesis.About 200 Mya, new selenoproteins were developed as mammalian GSH-Px enzymes.

Chalcogen compounds

Selenium forms two oxides: selenium dioxide (SeO₂) and selenium trioxide (SeO₃). Selenium dioxide is formed by the reaction of elemental selenium with oxygen:

Se₈ + 8 O₂ → 8 SeO₂

It is a polymeric solid that forms monomeric SeO₂ molecules in the gas phase. It dissolves in water to form selenous acid, H₂SeO₃. Selenous acid can also be made directly by oxidising elemental selenium with nitric acid:

3 Se + 4 HNO₃ → 3 H₂SeO₃ + 4 NO

Salts of selenous acid are called selenites. These include silver selenite (Ag₂SeO₃) and sodium selenite (Na₂SeO₃).

Hydrogen sulfide reacts with aqueous selenous acid to produce selenium disulfide:

H₂SeO₃ + 2 H₂S → SeS₂ + 3 H₂O

Selenium disulfide consists of 8-membered rings of sulfur atoms with selenium replacing some of the sulfur atoms. It has an approximate composition of SeS₂, with individual rings varying in composition, such as Se₄S₄ and Se₂S₆. It has various applications, including use in shampoo as an anti-dandruff agent, an inhibitor in polymer chemistry, a glass dye, and a reducing agent in fireworks.

Unlike sulfur, which forms a stable trioxide, selenium trioxide is unstable and decomposes to the dioxide above 185 °C:

2 SeO₃ → 2 SeO₂ + O₂ (ΔH = −54 kJ/mol)

Selenium trioxide may be synthesized by dehydrating selenic acid, H₂SeO₄, which is itself produced by the oxidation of selenium dioxide with hydrogen peroxide:

SeO₂ + H₂O₂ → H₂SeO₄

Hot, concentrated selenic acid is capable of dissolving gold, forming gold(III) selenate.

Selenium reacts with fluorine to form selenium hexafluoride:

Se₈ + 24 F₂ → 8 SeF₆

Unlike its sulfur counterpart, sulfur hexafluoride, however, SeF₆ is more reactive and is a toxic pulmonary irritant. It can cause frostbite and severe irritation on contact with skin.

Other selenium halides include SeF₄, Se₂Cl₂, SeCl₄, and Se₂Br₂. Selenium dichloride (SeCl₂), an important reagent in the study of selenium chemistry, may be prepared in pure form by reacting elemental selenium with SO₂Cl₂ in THF solution. Some of the selenium oxyhalides, such as SeOF₂, are useful as nonaqueous solvents.

Like oxygen and sulfur, selenium forms selenides with metals. For example, reaction with aluminum forms aluminum selenide:

3 Se₈ + 16 Al → 8 Al₂Se₃

Other selenides include mercury selenide (HgSe), lead selenide (PbSe), and zinc selenide (ZnSe). An important selenide is copper indium gallium selenide (Cu(Ga,In)Se₂), a semiconductor.

Selenium does not react directly with hydrogen; so hydrogen selenide, the analogue of hydrogen sulfide and water, is prepared by first reacting selenium with a metal to produce a selenide, and then protonating the selenide anion with an acid to produce H₂Se.

Tetraselenium tetranitride, Se₄N₄, is an explosive orange compound analogous to S₄N₄ It can be synthesized by the reaction of SeCl₄ with [((CH₃)₃Si)₂N]₂Se in dichloromethane solution at −78 °C.

Selenium reacts with cyanides to yield selenocyanates.For example:

8 KCN + Se₈ → 8 KSeCN

歡 迎來到Bewise Inc.的世界，首先恭喜您來到這接受新的資訊讓產業更有競爭力，我們是提供專業刀具製造商，應對客戶高品質的刀具需求，我們可以協助客戶滿足您對產業的 不同要求，我們有能力達到非常卓越的客戶需求品質，這是現有相關技術無法比擬的，我們成功的滿足了各行各業的要求，包括：精密HSS DIN切削刀具、協助客戶設計刀具流程、DIN or JIS 鎢鋼切削刀具設計、NAS986 NAS965 NAS897 NAS937orNAS907 航太切削刀具,NAS航太刀具設計、超高硬度的切削刀具、醫療配件刀具設計、複合式再研磨機、PCD地板專用企口鑽石組合刀具、粉末造粒成型機、主機版專用頂級電桿、PCD V-Cut刀、捨棄式圓鋸片組、粉末成型機、航空機械鉸刀、主機版專用頂級電感、’汽車業刀具設計、電子產業鑽石刀具、木工產業鑽石刀具、銑刀與切斷複合再研磨機、銑刀與鑽頭複合再研磨機、銑刀與螺絲攻複合再研磨機等等。我們的產品涵蓋了從民生 刀具到工業級的刀具設計；從微細刀具到大型刀具；從小型生產到大型量產；全自動整合；我們的技術可提供您連續生產的效能，我們整體的服務及卓越的技術，恭 迎您親自體驗！！

BW Bewise Inc. Willy Chen willy@tool-tool.com bw@tool-tool.com www.tool-tool.com skype:willy_chen_bw mobile:0937-618-190 Head &Administration Office No.13,Shiang Shang 2nd St., West Chiu Taichung,Taiwan 40356 http://www.tool-tool.com / FAX:+886 4 2471 4839 N.Branch 5F,No.460,Fu Shin North Rd.,Taipei,Taiwan S.Branch No.24,Sec.1,Chia Pu East Rd.,Taipao City,Chiayi Hsien,Taiwan

Welcome to BW tool world! We are an experienced tool maker specialized in cutting tools. We focus on what you need and endeavor to research the best cutter to satisfy users’ demand. Our customers involve wide range of industries, like mold & die, aerospace, electronic, machinery, etc. We are professional expert in cutting field. We would like to solve every problem from you. Please feel free to contact us, its our pleasure to serve for you. BW product including: cutting tool、aerospace tool .HSS  DIN Cutting tool、Carbide end mills、Carbide cutting tool、NAS Cutting tool、NAS986 NAS965 NAS897 NAS937orNAS907 Cutting Tools,Carbide end mill、disc milling cutter,Aerospace cutting tool、hss drill’Фрезеры’Carbide drill、High speed steel、Compound Sharpener’Milling cutter、INDUCTORS FOR PCD’CVDD(Chemical Vapor Deposition Diamond )’PCBN (Polycrystalline Cubic Boron Nitride) ’Core drill、Tapered end mills、CVD Diamond Tools Inserts’PCD Edge-Beveling Cutter(Golden Finger’PCD V-Cutter’PCD Wood tools’PCD Cutting tools’PCD Circular Saw Blade’PVDD End Mills’diamond tool. INDUCTORS FOR PCD . POWDER FORMING MACHINE ‘Single Crystal Diamond ‘Metric end mills、Miniature end mills、Специальные режущие инструменты ‘Пустотелое сверло ‘Pilot reamer、Fraises’Fresas con mango’ PCD (Polycrystalline diamond) ‘Frese’POWDER FORMING MACHINE’Electronics cutter、Step drill、Metal cutting saw、Double margin drill、Gun barrel、Angle milling cutter、Carbide burrs、Carbide tipped cutter、Chamfering tool、IC card engraving cutter、Side cutter、Staple Cutter’PCD diamond cutter specialized in grooving floors’V-Cut PCD Circular Diamond Tipped Saw Blade with Indexable Insert’ PCD Diamond Tool’ Saw Blade with Indexable Insert’NAS tool、DIN or JIS tool、Special tool、Metal slitting saws、Shell end mills、Side and face milling cutters、Side chip clearance saws、Long end mills’end mill grinder’drill grinder’sharpener、Stub roughing end mills、Dovetail milling cutters、Carbide slot drills、Carbide torus cutters、Angel carbide end mills、Carbide torus cutters、Carbide ball-nosed slot drills、Mould cutter、Tool manufacturer.

Bewise Inc. www.tool-tool.com

よ うこそＢｅｗｉｓｅ　Ｉｎｃ.の 世界へお越し下さいませ、先ず御目出度たいのは新たな

情報を受け取って頂き、もっと各産業に競争力プラス展開。

弊社は専門なエンド・ミルの製造メーカーで、客先に色んな分野のニーズ、

豊富なパリエーションを満足させ、特にハイテク品質要求にサポート致します。

弊社は各領域に供給 できる内容は：

（１）精密 ＨＳＳエンド・ミルのＲ＆Ｄ

（２）Carbide Cutting tools設計

（３）鎢鋼エンド・ミ ル設計

（４）航空エ ンド・ミル設計

（５）超高硬度エンド・ミル

（６）ダイヤモンド・エンド・ミ ル

（７）医療用品エ ンド・ミル設計

（８）自動車部品＆材料加工向けエンド・ミル設計

弊社の製品の供給調達機能は：

（１）生活産業～ハイテク工業までのエンド・ミル設計

（２）ミクロ・エ ンド・ミル～大型エンド・ミル供給

（３）小Ｌｏｔ生産～大量発注対応供給

（４）オートメーション整備調達

（５）スポット対応～流れ生産対応

弊社 の全般供給体制及び技術自慢の総合専門製造メーカーに貴方のご体験を御待ちしております。

Bewise Inc. talaşlı imalat sanayinde en fazla kullanılan ve üç eksende (x,y,z) talaş kaldırabilen freze takımlarından olan Parmak Freze imalatçısıdır. Çok geniş ürün yelpazesine sahip olan firmanın başlıca ürünlerini Karbür Parmak Frezeler, Kalıpçı Frezeleri, Kaba Talaş Frezeleri, Konik Alın Frezeler, Köşe Radyüs Frezeler, İki Ağızlı Kısa ve Uzun Küresel Frezeler, İç Bükey Frezeler vb. şeklinde sıralayabiliriz.

BW специализируется в научных исследованиях и разработках, и снабжаем самым высокотехнологичным карбидовым материалом для поставки режущих / фрезеровочных инструментов для почвы, воздушного пространства и электронной индустрии. В нашу основную продукцию входит твердый карбид / быстрорежущая сталь, а также двигатели, микроэлектрические дрели, IC картонорезальные машины, фрезы для гравирования, режущие пилы, фрезеры-расширители, фрезеры-расширители с резцом, дрели, резаки форм для шлицевого вала / звездочки роликовой цепи, и специальные нано инструменты. Пожалуйста, посетите сайт  www.tool-tool.com  для получения большей информации.

BW is specialized in R&D and sourcing the most advanced carbide material with high-tech coating to supply cutting / milling tool for mould & die, aero space and electronic industry. Our main products include solid carbide / HSS end mills, micro electronic drill, IC card cutter, engraving cutter, shell end mills, cutting saw, reamer, thread reamer, leading drill, involute gear cutter for spur wheel, rack and worm milling cutter, thread milling cutter, form cutters for spline shaft/roller chain sprocket, and special tool, with nano grade. Please visit our web  www.tool-tool.com  for more info.